How i create a contrator of iscsi target?

My server connects to a multiple initiator, for example to connect to srv1, srv2, srv3 which are published by iscsi target 500 GB on each of these servers. And what I want is a server that concentrates that space in a storage pool, and then I publish through iscsc target that space to be used in my headquarters through fiber optic connection. I only have access to the srv-storage from the headquarters .

srv1  ------( )
srv2  ------( ) srv-storage -------- srv-headquarters
srv3  ------( )   iscsi target             iscsi initiator
Yanier SanchezSystem and network administratorAsked:
Who is Participating?
 
andyalderConnect With a Mentor Commented:
Sounds like you are looking to use Storage Spaces to combine multiple LUNs in a pool, that's not supported.

See 10. Does iSCSI Target support Storage spaces?
Using iSCSI LUNs in a Storage Spaces pool is not supported.
https://blogs.technet.microsoft.com/filecab/2012/05/21/introduction-of-iscsi-target-in-windows-server-2012/
1
 
nociSoftware EngineerCommented:
Define pooling... if you combine them with LV or Raid and present as one disk it should be doable.
JBOD means you need 3 different access paths to get to each backend.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.