asked on

SOFTWARE UPDATES ARE NOT INSTALLED IN WINDOWS 10 1703 TASK SEQUENCE

SOFTWARE UPDATES ARE NOT INSTALLED IN WINDOWS 10 1703 TASK SEQUENCE:

Software updates are not getting installed from task sequence during Windows 10 1703 build.

We have the latest version of SCCM Client in place and used respective version of ADK while capturing image.

Followed the instructions are added registry as per this link: https://msitproblog.com/2017/06/08/windows-10-1703-update-installation-fails-mdt-task-sequence/.
But, we get the below error during build from Windows Update log. ATTACHED LOG FILE for reference.

Please provide us ideas to get this issue fixed.

2018/03/23 13:22:38.1500375 276 3448 Metadata [0]0114.0D78::03/23/2018-13:22:38.150 [metadataintegrity] failed: hr = 0x8024500C
2018/03/23 13:22:38.1500397 276 3448 Metadata [0]0114.0D78::03/23/2018-13:22:38.150 [metadataintegrity]GetFragmentSigningConfig failed with 0x8024500C. Using default enforcement mode: Audit.
2018/03/23 13:22:38.1500404 276 3448 Metadata [0]0114.0D78::03/23/2018-13:22:38.150 [metadataintegrity] failed: hr = 0x8024500C

2018/03/23 13:27:29.9309801 4344 4848 ComApi [0]10F8.12F0::03/23/2018-13:27:29.930 [comapi]ISusInternal:: DisconnectCall failed, hr=8024000C
2018/03/23 13:27:29.9372862 4344 4848 ComApi [0]10F8.12F0::03/23/2018-13:27:29.937 [comapi]ISusInternal:: DisconnectCall failed, hr=8024000C
2018/03/23 13:27:34.9056674 276 840 Reporter [0]0114.0348::03/23/2018-13:27:34.905 [reporting]REPORT EVENT: {0E7C1F87-75C9-438B-905A-68EE1F0E8C59} 2018-03-23 13:27:29:895-0500 1 148 [AGENT_DETECTION_FAILED] 101 {00000000-0000-0000-0000-000000000000} 0 8024000d CcmExec Failure Software Synchronization Windows Update Client failed to detect with error 0x8024000d.

2018/03/23 13:27:44.9657692 4344 1728 ComApi [0]10F8.06C0::03/23/2018-13:27:44.965 [comapi]Failed to process completed federation member search, hr=0x8024000D, code=6 (cV = qiblimkPQUWKAh/R.18.0)
WindowsUpdate.log

Kyle Santos

Hi,

I am following up on your question. Do you still need help?

If you solved the problem on your own, would you please post the solution here in case others have the same problem?

Regards,

Kyle Santos
Customer Relations

KC2TC

ASKER

Hello, We don't find any solution. Still working on it.
Thanks.

yo_bee

Do you have application after the Update TS part. I have seen in my environment that Updates fail to instill in the TS if there are additional applications like Office that in subsidiary steps.

Not sure if that is the case for you.

ASKER CERTIFIED SOLUTION

KC2TC

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

yo_bee

good find.