seaweed27
asked on
How to Route traffic between Multiple Hyper-V VM Routers-
I would like to set up 2 virtual routers/appliances on a Hyper V box(MS2016). I'm looking for a general guide or how to, if one exists. Why? sng's, just cause, and or stretching my legs.
For this example/test
I have already set up a test server with MS2016 configured with Hyper-V server role. The server has 3 physical Nics. I am using Opnsense/Pfsence as one vm, and untangle as a second vm and one Virtual switch so far.
This is kinda what I envision
Int/Cbl Modem<----->VM1 Pub int Dhcp from Cable modem- Priv Int static 192.168.200.1/30<--------> VM2 Pub Int static 192.168.200.2/30--Prv Int static192.168.1.1 w dhcp /24
Struggling how to put it to practice in the VM environment.
Thanks in Advance
For this example/test
I have already set up a test server with MS2016 configured with Hyper-V server role. The server has 3 physical Nics. I am using Opnsense/Pfsence as one vm, and untangle as a second vm and one Virtual switch so far.
This is kinda what I envision
Int/Cbl Modem<----->VM1 Pub int Dhcp from Cable modem- Priv Int static 192.168.200.1/30<-------->
Struggling how to put it to practice in the VM environment.
Thanks in Advance
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Seaweed