How do you differentiate a standard ASA5500-X to a FPWR model?

ciscoquestion used Ask the Experts™
We are looking for details on how to confirm if a Cisco ASA55**-X firewall can be considered a FPWR model (EG: ASA5515-FPWR-K9 or ASA5555-FPWR-K9). Cisco's documentation is not terribly clear about the specific details they should have.  Is there anything in particular we should be looking for in the console?  
We have several ASA5555/ASA5515 with the following response from the ‘show version’ command.  Is this enough, or are there other factors we need to take into account?
ciscoasa# show version
Cisco Adaptive Security Appliance Software Version 9.9(1)3
Firepower Extensible Operating System Version 2.3(1.54)
Device Manager Version 7.9(1)151
Any confirmation on these things is much appreciated.
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Distinguished Expert 2018

EG: ASA5515-FPWR-K9 or ASA5555-FPWR-K9 - both are firepower models.
You can find lists and part numbers:
Cisco ASA with FirePOWER Services Data Sheet
For more details, you can also check:
Frequently Asked Questions (FAQ) about Firepower Licensing
Cisco Services Q&A for Sourcefire Customers
Technical Consultant
>can be considered a FPWR model

Depending on your point of view all next Gen '-X' firewalls are FirePOWER firewalls. And while it it possible to purchase the hardware without the SSD in them that FirePOWER is installed on, thats the only difference.

Any firewall ttat ends in a 6-X, 8-X, or 5-X (with the exception of the 5505 of course) can run firepower services


Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial