Link to home
Start Free TrialLog in
Avatar of craig
craig

asked on

Port forwarding Watchguard - WSM Policy Manager

Good day-
I'm attemtping to forward port inbound requests on port 80 to internal port 16000 for viewing of a DVR camera system.  Can someone guide me over policy manager? I'm not understanding the kb from watchguard.

Best,
Craig
Avatar of David Johnson, CD
David Johnson, CD
Flag of Canada image

what you are asking for is how to set up port forwarding
Try this article and feel free to ask questions if you get stuck
Avatar of craig
craig

ASKER

here's where I'm at stuck.  I set a SNAT for port 80 and attached it to http server policy.  but actually need to forward 16000 and 16001 to the IP.  stumped novice
ASKER CERTIFIED SOLUTION
Avatar of David Johnson, CD
David Johnson, CD
Flag of Canada image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of craig

ASKER

first, I'm not working on watchguard system manager
. I have not used the Web UI.  in policy manager.  

I'm unsure if there is a risk switching back and forth.

should be port 16000 to 16000
                  port 16001 to 16001 simple enough?
Avatar of craig

ASKER

Thanks for you time.  Sorry I left this question OPEN.  I had to create a custom rule....was using standard forwards.