Broken green wire off ATX, PSU

I have an old psi which I want to convert to a 12v power supply for some led lights.
 The problem is that in cleaning out the dust before I got started the green wire has broken off the board.
 Where does it solder back onto as I cannot identify where it broke off from.

 Thanks for your help in advance.
Rich FieldAsked:
Who is Participating?
 
Iamthecreator OMConnect With a Mentor Administrateur Systeme et ReseauxCommented:
0
 
Rich FieldAuthor Commented:
Brilliant, thanks for the quick and very helpful response.
0
 
nobusCommented:
>>   the green wire has broken off the board.  << it broke from what board??  afaik when you use a PS - you don't need a board
just shunt the green wire to a grnd wire - to get it going
0
Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

 
Rich FieldAuthor Commented:
The green wire has broken off the printed circuit board inside the psu
 Sorry I thought I had made it clear I was only talking about the psu.
0
 
nobusCommented:
then the links above don't help ...what model is it?  it can give more info
0
 
Rich FieldAuthor Commented:
Thanks all sorted and working.
0
 
Iamthecreator OMAdministrateur Systeme et ReseauxCommented:
Author acknowledges comment to be helpful.
0
All Courses

From novice to tech pro — start learning today.