Hp pro 200 map, scanner feature stop working with sonicwall firewall unit

We just installed sonicwall unit a couple days and our hp laserjet pro 200 scanner feature stop working. Before, we have been using that feature without any issues. The printer is wired connected on the network. The printer feature is working ok, but the scanner doesn't. Do we need to create a rule into sonicwall? How should be the steps to follow up? We have a sonicwall TZ300w. Please help!
Javier JaramilloITAsked:
Who is Participating?
 
Wayne88Connect With a Mentor Commented:
I just can't see the Sonicwall being an issue if both the HP MFP and computer is on the same network because communication will not go thru the Sonicwall.  Unless if you are using WiFi printing/scanning then that makes sense.
0
 
Wayne88Commented:
Do you have multiple VLAN?  If yes then you will need to create a rule.

If the scanner on the same network as the computer then you shouldn't need to open up any port on the Sonicwall.
0
 
Wayne88Commented:
Hi Javie, are you using WiFi to print?
0
Improve Your Query Performance Tuning

In this FREE six-day email course, you'll learn from Janis Griffin, Database Performance Evangelist. She'll teach 12 steps that you can use to optimize your queries as much as possible and see measurable results in your work. Get started today!

 
lanboyoCommented:
Keep in mind that the scanner might be using DNS and rendezvous which might not work thru the firewall.
0
 
Javier JaramilloITAuthor Commented:
Thank you for the link, it was very useful. Now, its working!
0
 
Wayne88Commented:
You're welcome!  Glad I was able to help and cheers!

For future reference, this was the link I sent to Javier.

https://www.sonicwall.com/en-us/support/knowledge-base/170505381440321
0
All Courses

From novice to tech pro — start learning today.