Nitin Pathak
asked on
UHF RFID reader ETS-IR 01 With raspberry pi
how raspberry pi 3 model connect with UHF RFID Reader version ETS-IR O1 with using interface rs-232
ASKER
bt i have interfacing with raspberry pi module not aurdino
RS232 - you need to connect the RX/TX lines (you need to connect RX of 1 to TX of the other and vice versa to create a null modem cable) on the computer you need to open the comm port and set its properties baud rate i.e. 9600 8N1.. you need a program i.e. a terminal connected to the comm port i.e. com1: this way you can check the communication between the 2 devices.. you now then need to create a program that will act on the received data
This question needs an answer!
Become an EE member today
7 DAY FREE TRIALMembers can start a 7-Day Free trial then enjoy unlimited access to the platform.
View membership options
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.
https://media.digikey.com/pdf/Data%20Sheets/Sparkfun%20PDFs/Simultaneous_RFID_Tag_Reader_HookupGuide_Web.pdf