DP230
asked on
Get Disk status by CMD or Powershell
Dear Wizards, is there any CMD or Powershell command to get these information?
- RAID status
- Disk information (Good, bad sectors...)
- LED light status on Hard disk
Many thanks!
- RAID status
- Disk information (Good, bad sectors...)
- LED light status on Hard disk
Many thanks!
Do you have a RAID controller? If so which one? Most controller manufacturers have CLIs that you can use in a script.
Hope this can help you get started..
https://redmondmag.com/articles/2014/09/10/evaluate-storage-health.aspx
https://redmondmag.com/articles/2014/09/10/evaluate-storage-health.aspx
ASKER
@Andy: I'm not sure about the RAID controller of this server. It is just an old IBM x3650 with 3 disks configure as RAID 5. Can you suggest?
@Raja: I followed the post but seem likes the information is not enough and incorrect
Can you help? Also, I'd like to monitor the RAID status but it did not show here
@Raja: I followed the post but seem likes the information is not enough and incorrect
Can you help? Also, I'd like to monitor the RAID status but it did not show here
LSI MegaRAID, (LSI is now owned by Broadcom), you can download MegaCLI from https://support.lenovo.com/gb/en/downloads/ds031558
some example commands at http://erikimh.com/megacli-cheatsheet/
Personally I would stick to the GUI (MegaRAID Storage Manager) and configure it to send emails, https://www.broadcom.com/support/knowledgebase/1211161496387/megaraid-storage-manager-msm-email-notification
some example commands at http://erikimh.com/megacli-cheatsheet/
Personally I would stick to the GUI (MegaRAID Storage Manager) and configure it to send emails, https://www.broadcom.com/support/knowledgebase/1211161496387/megaraid-storage-manager-msm-email-notification
>> I followed the post but seem likes the information is not enough and incorrect
Get-StorageReliabilityCoun ter earlier used to work but not working for me as well now.
Can you check the ones provided by Andy above and let us know whether it works or not..
Get-StorageReliabilityCoun
Can you check the ones provided by Andy above and let us know whether it works or not..
ASKER
Have you tried checking for monitoring scripts from your vendor and if not, try that once..
Try IBM StorCLI instead, https://www.ibm.com/support/home/docdisplay?lndocid=MIGR-5095500. It may already be installed, if you cam find MSM or IBM ServerRaid Manager installed that will identify the controller. LSI make the IBM ServerRAID controllers but sometimes the generic LSI software does not work due to firmware tweaking.
If you find the exact model of the RAID controller we could be more exact, I was going from the logical disk having LSILOGIC in its description.
If you find the exact model of the RAID controller we could be more exact, I was going from the logical disk having LSILOGIC in its description.
HPE's MIBs are included with HPE SIM, https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=null&swItemId=MTX_07708032012a4bcb8024c3bedf&swEnvOid=4184
This question needs an answer!
Become an EE member today
7 DAY FREE TRIALMembers can start a 7-Day Free trial then enjoy unlimited access to the platform.
View membership options
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.