Alasdairb
asked on
ASA lost boot image
Hi
Cisco ASA 5506 X, I mistakenly deleted the boot file - I meant to delete the ASDM version :-). So I can only boot into rommon. I have seen many articles about using tftp in rommon to copy an image but the problem I have is that the ASA interfaces are down. No link light. My Ethernet cable shows as not connected, so my TFTP server is not listening. I have tried using a normal patch cable directly between my PC and ASA, also plugging both interfaces into a switch.
Does anyone know how to fix this?
Thanks very much.
Alasdair
Cisco ASA 5506 X, I mistakenly deleted the boot file - I meant to delete the ASDM version :-). So I can only boot into rommon. I have seen many articles about using tftp in rommon to copy an image but the problem I have is that the ASA interfaces are down. No link light. My Ethernet cable shows as not connected, so my TFTP server is not listening. I have tried using a normal patch cable directly between my PC and ASA, also plugging both interfaces into a switch.
Does anyone know how to fix this?
Thanks very much.
Alasdair
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Solution provided. No further comment from asker. Requesting close