marceloNYC
asked on
Meraki To Cisco ASA 5500 Site to Site VPN
Dear Experts,
We are setting up a Site2Site VPN between Meraki Firewall MX64W and an ASA 5510 firewall.
First time I do this.
I am not sure how to add the Meraki network peer address in the ASA firewall. All the VPNs I have here are pointing to public static IP addresses. The Meraki is DHCP. I only see that dashboard address that I wonder if I could use.
Any useful documents you know of for this task?
Thank you
We are setting up a Site2Site VPN between Meraki Firewall MX64W and an ASA 5510 firewall.
First time I do this.
I am not sure how to add the Meraki network peer address in the ASA firewall. All the VPNs I have here are pointing to public static IP addresses. The Meraki is DHCP. I only see that dashboard address that I wonder if I could use.
Any useful documents you know of for this task?
Thank you
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thank you! Lets have some fun with this now
ASKER
Marcelo,
Thank you for contacting Cisco Meraki Technical Support.
You will use http://12.cc.tt.106 as Meraki's Public IP on the ASA.
I've included some documentation that may be of use to you below:
https://documentation.meraki.com/MX-Z/Site-to-site_VPN/Configuring_Cisco_ASA_for_Site-to-site_VPN_with_MX_Series_Appliances_using_the_Command_Line_Interface
Best Regards,
Priyank Shah
Cisco Meraki Technical Support