Link to home
Start Free TrialLog in
Avatar of Alex E.
Alex E.

asked on

Retina not pass signal with minis display to DVI in restoration bios

Hello I’m using a minidisplay to DVI converter on a retina 2013. Works fine inside OS x or Windows with bootcamp. The problem is the monitor stopped working and I will give my computer malfunction like it is to another person, but when I press Command + R to make the proper data deletion and re-installation to factory, the signal is not passed to the monitor and of course the monitor of the retina not work and I can’t operate. How can I make to pass the signal to the monitor with the mini display to DVI in restoration menu with Command + R

Thank you
Avatar of serialband
serialband
Flag of Ukraine image

You might want to try a different monitor.

When you boot into Recovery Mode, it's booting up with a very limited set of Drivers, just enough for those simple tasks.  The Recovery partition is actually quite small and does not contain everything needed to support all the peripherals and devices.
Avatar of Alex E.
Alex E.

ASKER

Then?
ASKER CERTIFIED SOLUTION
Avatar of Alex E.
Alex E.

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Alex E.

ASKER

Solved closing the lid totally