Configure 3rd port for internet access on WatchGuard Firebox T10

rrincones
rrincones used Ask the Experts™
on
Customer has a watchguard T10 firebox firewall for a pos system.  The POS server connects directly to the trusted network port. no other computers connect to that network.  

Customer wants to setup an access point for wifi.  The watchguard has a 3rd port.  I want to activate it as a second network and allow wireless devices to access the internet.  

The watchguard firewall does not have built in wifi.  We purchased an access point that we plan to connect to the 3rd port.

This is a restaurant, there are no office pc's or network printers.

Need suggestions on policy's, the device has contenfilter subscriptions.  I want to enforce them on the 3rd port too if possible.
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Kyle SantosSoftware Test Analyst I at Dassault Systemes

Commented:
Hi,

I am here to help you with your open question.  Do you still need help?  I have the ability to alert more experts if you still need help.

If you solved the problem on your own, would you please post the solution here in case others have the same problem?

If you need me to delete this question just say "Delete."

Thank you for using Experts Exchange.

Regards,

Kyle Santos
Customer Relations

Author

Commented:
I found a walk thru for setting up a second network and allowing internet traffic thru while at the same time separating it from the main network.

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial