AXISHK
asked on
VPN client network routing on Sonicwall
Is it possible to configure the SSL VPN on Sonicwall such that all traffic will route through Sonicwall, except the networking printing, where it should go to the client's network printing ?
Currently, a remote VPN client can't print to his network printer if "Tunnel all mode" is on. It can only work if the setting is off.
Can I setup a routing table in SSL VPN to tell Sonicwall how to route a client's network subnet back to the client ?
Thx
Currently, a remote VPN client can't print to his network printer if "Tunnel all mode" is on. It can only work if the setting is off.
Can I setup a routing table in SSL VPN to tell Sonicwall how to route a client's network subnet back to the client ?
Thx
The only issue with going a local route direction is you would need to know your user's local subnet and/or printer ip. It would be a per user configuration.
ASKER
Any reference to show me where to configure it in Sonicwall wall ?
Thx
Thx
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
However, you could run a post connect script to add a local route for the local network with a higher priority (lower metric)