Andy Doe
asked on
unable to fully remove printers
2 Xerox 7830 printers keep re-appearing when removed from a 2012 server.
they have been removed from the print server and there is NO GPO that is re-deploying them
does anyone have any other ideas why they would keep being re-installed
setup is as follows
1 DC
1 file server ( with print server installed)
1 RDS
multiple workstations
whenever the 7830 is removed from any device within maybe 2 minutes it will automatically be reinstalled even though it does not actual exist anymore.
they have been removed from the print server and there is NO GPO that is re-deploying them
does anyone have any other ideas why they would keep being re-installed
setup is as follows
1 DC
1 file server ( with print server installed)
1 RDS
multiple workstations
whenever the 7830 is removed from any device within maybe 2 minutes it will automatically be reinstalled even though it does not actual exist anymore.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Some printer manufacturers have "Printer Removal Software" on their website that fixes most problems with printer removal.
As for the most probable cause for the printers reappearing; RDS. If a user has that printer installed and they want to print from their RDS session locally, their default printer is forwarded and will utilize the printer driver on the server; if available.
-saige-
-saige-