asked on
Configure Sonicwall TZ300 open ports 5060 5061 for SIP registration
I have a client with a Sonicwall TZ300 that wants to use Cox Edgemarc VOIP phone system. The Edgemarc needs Ports 5060 and 5061 open for SIP registration. I am looking for either step by step instructions or someone experienced in configuring Sonicwall.
Hardware Firewalls
Last Comment
masnrock
ASKER CERTIFIED SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
Honestly, I would go a different route if possible. If the customer has managed switches and multiple public IPs (or is willing to do so), do the following:
* Give one public IP to the sonicwall
* Give one to the Edgemarc
* Create VLANs on the switches in order to keep segregation between the Edgemarc and Sonicwall networks. And make sure that the networks are not allowed to talk to one another.
* Give one public IP to the sonicwall
* Give one to the Edgemarc
* Create VLANs on the switches in order to keep segregation between the Edgemarc and Sonicwall networks. And make sure that the networks are not allowed to talk to one another.
You will have to create a one-to-one NAT policy, and add frewall rules.