RSSI and SNR from Cisco CP-8821 mobile phone

Solo Pascual
Solo Pascual used Ask the Experts™
on
Does anyone know of a specific way to get the RSSI and SNR from a CP-8821 Cisco mobile phone?  I checked what I could from the phone itself and tried a couple of other free utiliies without getting that info.  Any ideas please let me know.  Thanks!
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Martin NguyenHelpDesk Technician
Distinguished Expert 2018

Commented:
Hi Solo,

I did some research and from the documentation it seems that you can find your last Received Signal Strength Indicator the phone received by performing WLAN diagnostics. You can do that by going to Settings -> Admin Settings -> Diagnostics -> WLAN, and then pressing continue. You should then be able to scroll down to the field Last RSSI and your phone will tell you that information. Your administrator might have restricted your access to that option.

I hope this helps, I'll look into finding a way to find the Signal to Noise Ratio (that is what you mean by SNR correct?).
Martin
HelpDesk Technician
Distinguished Expert 2018
Commented:
It also sounds like if you can access the Admin Settings Menu, if you go to the Neighbor List Menu and see the RSSI of available access points.
Solo PascualIT Support

Author

Commented:
Thank you very much.  This is what I needed.
Martin NguyenHelpDesk Technician
Distinguished Expert 2018

Commented:
Glad to be of assistance!

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial