Avatar of Mihail Borisov
Mihail Borisov

asked on 

Hyper-V Replica goes critical with event ID 32022 logged evry two hours

Hello,

I have a problem with the initial Hyper-V replication of one of my VMs and I'm out of ideas. I will realy appreciate some help. The replication health goes critical with event ID 32022. Then replication resumes after one minute and exactly after two hours (+/- 2-3 minutes) the error repeats. At exaclty the same time Event ID 29296 is logged on the replica server.  Both my Hyper-V host servers (primary and replica) are Windows 2016 Datacenter.

Currently both my servers are located next to each other (over a switch).

I'm trying to replicate 4,2 TB distibuted into 4 virtual disks and it takes a lot fo time, However the same issue occurs even when trying to replicate with the VM turned off (so no changes to its virtual disks).


So every two hours, I have in the log the following:

Primary server:
---

Event ID32022 has either this description:

The description for Event ID 32022 from source Microsoft-Windows-Hyper-V-VMMS cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

[My VM name]
1386FE00-0F0F-4931-9FB3-6C71993F335B
%%2147952454
0x80072746

The locale specific resource for the desired message is not present

---

,or this description:

Hyper-V could not replicate changes for virtual machine '[My VM name]': The operation timed out (0x00002EE2). (Virtual machine ID 1386FE00-0F0F-4931-9FB3-6C71993F335B)

---
This event is immediately followed by:

Event ID 32315

Hyper-V failed to replicate changes for virtual machine '[My Vm name]' (Virtual machine ID 1386FE00-0F0F-4931-9FB3-6C71993F335B). Hyper-V will retry replication after 1 minute(s).

---

At the same time the following event occurs on the replica server:

The description for Event ID 29296 from source Microsoft-Windows-Hyper-V-VMMS cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

[My VM name]
1386FE00-0F0F-4931-9FB3-6C71993F335B
%%2147942459
0x8007003B

The locale specific resource for the desired message is not present
---

Thanks for your help in advance!

Regards
VirtualizationWindows 10Hyper-VAzureWindows Server 2016

Avatar of undefined
Last Comment
Seth Simmons

8/22/2022 - Mon