Dawn Marie Stanford
asked on
imac screen adhesive
Hello all. i just upgraded an iMac (Retina 5K, 27-inch, Mid 2015) to an ssd and all went smoothly except that the adhesive will not hold the glass. any suggestions would be most welcome.
ASKER
Thank you for your response.
i apologize for not being clear but i did replace the adhesive.
i used these instructions- https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2546+Adhesive+Strips+Replacement/15624
and this kit https://www.amazon.com/gp/product/B00JQMPWKQ/ref=ox_sc_act_title_2?smid=A3UW28G9WPPLAW&psc=1
i apologize for not being clear but i did replace the adhesive.
i used these instructions- https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2546+Adhesive+Strips+Replacement/15624
and this kit https://www.amazon.com/gp/product/B00JQMPWKQ/ref=ox_sc_act_title_2?smid=A3UW28G9WPPLAW&psc=1
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
yes- from around all 4 sides.
Is the adhesive not sticking?
ASKER
it seemed like it was sticking when i put it together. when the user started working on the machine, the screen started separating.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
thank you. i will try that
You're welcome! Best of Luck to you
You may want to try and just replacing the adhesive strip again. After the adhesive has been cut it cannot be used to reseal the display case.
The kit is 19.99 https://www.ifixit.com/Guide/iMac+Intel+27-Inch+Retina+5K+Display+Adhesive+Strip+Replacement/30512
I hope this helps you out. Have a great day.
Stacy