Link to home
Start Free TrialLog in
Avatar of Amin El-Zein
Amin El-Zein

asked on

slm224g vlan problem

hello,
I have cisco slm224g switch
I have a windows server 2016 with Hyper-V rule
I have three vlans 2, 3
Hyper-V on port 1
adsl router on port 2
client work station on port 3
on Hyper-V I have a pfsense as vm with two network interface the first one with vlan id =2 and the second one vlan id=3 on the same interface.
I want to assign client ,Hyper-V to vlan 2 and should connect over port 1 to first interface on Hyper-V
I want to assign adsl router to vlan3 and should connect  over port 1 to second interface on Hyper-V
regarding above:
port 1 should be trunk  for vlan id 2,3
port 2 should be access to vlan 3
and port 3 should be access as vlan 2
I tried that but it's not working so what the basic configuration for that ?
thanks.
Avatar of ArneLovius
ArneLovius
Flag of United Kingdom of Great Britain and Northern Ireland image

I would guess that you tagged the VLAN in pfsense, you need to tag the VLANs in HYper-V
ASKER CERTIFIED SOLUTION
Avatar of Amin El-Zein
Amin El-Zein

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial