HP/Aruba Policy Based Routing

AutomatedIT
AutomatedIT used Ask the Experts™
on
Working with an HP/Aruba 3810M switch in a stacked/mesh configuration.  We would like to set up Policy Based Routing so that we can send traffic from different VLANs out to different internet gateway routers.  The 3810M would be the "LAN Router" for all VLANs with multiple directly connected routers for forwarding traffic to the internet.  

For example:
VLAN 30 with 172.30.0.0/24 traffic would be default routed 0.0.0.0/0 to 172.30.0.10
VLAN 40 with 172.40.0.0/24 traffic would be default routed 0.0.0.0/0 to 172.40.0.10
The 3810M would have IP 172.30.0.1/24 on VLAN 30 Interface and 172.40.0.1/24 on VLAN 40 Interface
*both default routes would only be used when no other static or directly connected routes exist.

I have done this before with Linux based routers but I am not sure how to do this with HP/Aruba.  Can anyone tell me how to configure this?

Thank you,
Jay
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Sr.Net.Eng
Top Expert 2011
Commented:
Please see the below link:

https://www.arubanetworks.com/techdocs/ArubaOS_73_Web_Help/Content/mas_guides/policy_based_routing/Configuring_PBR.htm

Essentially, you will need to create an ACL that matches your source vlan and set the next hop in the acl. Then apply this acl to the appropriate VLAN interface.

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial