Link to home
Start Free TrialLog in
Avatar of Math Tec
Math TecFlag for United States of America

asked on

Replacing failed hard drive (RAID 1) HP DL380 G7 and Build RAID again

Hi,

I have HP DL380 G7 server that has 6 drives. Each two drives working under RAID1 configuration. One of hard drive failed (start to blink yellow color).  I want to replace it with a new one. I have same size hard drive but I do not know how to build RAID 1 configuration again for the failed drive.

All drives are SAS and hot swap. Are there any documents or video that can help me to do that?

Thank you in advance.
Regards
ASKER CERTIFIED SOLUTION
Avatar of Member_2_231077
Member_2_231077

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Alex
As above,

You can go into your HP Array Configuration Utility to check progress, click start, all programs, HP and it's in there, i'm sure you'll find it :D

Simply pull out the flashing yellow one, put in your new one, it'll automatically start mirroring the data over :-)

Regards and Merry Christmas.

Alex
Avatar of Math Tec

ASKER

Hi,

Merry Christmas and thank you for helping me.

Regards