Samsung M2070 Sleep Mode

My printer (not Samsung) wakes up on its own. It just takes a bit longer.

If your Samsung is not automatic, turn power saver OFF altogether

Anyone know for this model where to set this - on panel or in software?

There is a solution here (yes  HP forum) about 3 or 4 posts down for your Samsung printer

https://h30434.www3.hp.com/t5/Samsung/Samsung-Printer-Sleep-Timer/td-p/6496949

Please let us know

And if John's suggestion does not work, try resetting the printer to factory defaults. I found this suggestion:

Press MENU,#,1,9,3,4,MENU.
Within 3 secs. select TECH MODE.
Scroll to display SERVICE FUNC. Here factory reset can be done using CLEAR ALL MEM.

Hdhondt - I don't believe this is for this model printer as I can't see tow to carry out the steps from MENU,# etc

Pls confirm.



John  in the link you rpovide above: This Menu item ( Sync through Web)  is "greyed out" and I can't access it. Pls advise :  Open the "Samsung Easy Printer Manager"
2) In the menu box on the right, choose "SyncThru Web Service." That will open up your printer status/settings page in a web browser

I am not sure why greyed out on your system.

Try this link for resetting the printer.

https://www.ereset.com/samsung-sl-m/fix-firmware-reset-xpress-sl-m2070f-m2070fw-m2074f-m2074fw-m2078f-m2078fw/

I am not sure if some steps are the same as posted above.

It seems very hard to get reliable information on your printer. I could not even find a data sheet.

I assume it is the Xpress M2070 Multifunction printer. If that is correct, you should be able to access the factory reset from the front panel, somewhere under MENU > SYSTEM SETUP

One possibility I found is Menu > System Setup > Machine Setup > Clear Setting

can you test the printer on another pc - to be sure the problem comes from the printer - or not?

@nobus power save is a printer feature, not a driver issue.

that may be - but just test it....
with PC's i've seen more than 1 cat turn all of a sudden into a dog...