Help routing across cisco 1832i WAP ME 8.5.140.0

I have a Cisco Aironet 1832i network. It is configured to use Mobility Express on firmware 8.5.140.0. There are 5 AP's on the network, and I need to connect Intermec scanners for warehouse operations. The production network is 192.168.13.0/24 and the wireless network is 10.10.13.128/26. What I want to do is to connect an Intermec wirelessly to the 10.10.13.x network and route it to the 192.168.13.0 network so it can hit a router to a 192.168.1.0/24 network... at the moment, I have the DHCP set up as follows:
Status: Enabled
VLAN ID: 1 (That is our default VLAN)
no management network
Lease Period 86400
network/Mask 10.10.13.128/255.255.255.192
Start IP 10.10.13.130
End IP 10.10.13.190
Default Gateway: Mobility Express Controller
DHCP Server ID: 10.10.13.190 (Automatic- I cannot change this)

I Had this network set up very similar to this previously on a Fortigate with FortiAP's, but we are trying to remove the Fortinet elements from our network.

Any ideas why I cannot get a ping response? I have tried to ping 10.10.13.127,128,129,130, and 131 just to see if the gateway will respond. I'm not averse to using CLI if that will make this work. I appreciate any help!