triphen
asked on
WDS/MDT PXE boot across different subnets using ubiquiti USG pro as DHCP server
Hello,
Currently we are trying to utilize PXE boot across subsets in our environment. Please read below for more information
Current network environment:
● The USG Router and Switches are assigned static IP addresses listed above
● The USG router has networks/vlans created on them via the UBNT controller UI (v5.10.23.0)
● The USG Router is responsible for DHCP for each network
● Our WDS/MDT server is 10.10.1.26/24 sitting on vlan 100
● We are able to PXEboot clients on the same subnet (10.10.1.x/24)
● Issue: We are trying to have clients on the Techbench network vlan 3340 be able to communicate pxe boot to our wds server (10.10.1.26/24)
Current settings in DHCP TechBench4 network
Advanced DHCP Options:
Error on Client machine:
I will soon place wireshark traffic logs when i finish testing:
Currently we are trying to utilize PXE boot across subsets in our environment. Please read below for more information
Current network environment:
● The USG Router and Switches are assigned static IP addresses listed above
● The USG router has networks/vlans created on them via the UBNT controller UI (v5.10.23.0)
● The USG Router is responsible for DHCP for each network
● Our WDS/MDT server is 10.10.1.26/24 sitting on vlan 100
● We are able to PXEboot clients on the same subnet (10.10.1.x/24)
● Issue: We are trying to have clients on the Techbench network vlan 3340 be able to communicate pxe boot to our wds server (10.10.1.26/24)
Current settings in DHCP TechBench4 network
Advanced DHCP Options:
Error on Client machine:
I will soon place wireshark traffic logs when i finish testing:
try taking the leading \ from the path
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.