Link to home
Start Free TrialLog in
Avatar of Shane
Shane

asked on

Raising Domain/Forest Functional Levels for Server 2019

I have only one DC. That DC is running 2008 R2. The domain and forest functional levels are both set at Windows 2003.

I am building a new DC to retire the old. That new DC will be running Server 2019.

Do I have to first raise the domain and forest functional levels to 2008 R2 on the current DC before I add the 2019 server to the domain? Do I then promote the 2019 server to a DC after first raising the levels to 2008 R2?


Thank you
Avatar of Scott Silva
Scott Silva
Flag of United States of America image

Is the old DC running on frs or dfsr replication?
You will probably have better luck making sure you are up to dfsr replication first. You most likely will have to raise the domain and forest levels too.
It MIGHT work without doing the above, but with a single DC, the risk is too great to break things.
ASKER CERTIFIED SOLUTION
Avatar of kevinhsieh
kevinhsieh
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
I knew Microsoft would drop FSR support as it was extremely problematic in earlier 2016 versions.