<div>
Hello,<br />
<br />
I'm not sure if there is a powershell command for this (Except if your DHCP Server run on windows server as ROLE)<br />
<br />
Use Network monitoring tools instead <br />
<br />
Please read this, <br />
<a href="http://www.tech-faq.com/monitoring-and-troubleshooting-the-dhcp-server.html" rel="ugc">http://www.tech-faq.com/monitoring-and-troubleshooting-the-dhcp-server.html</a>
</div>


Hello,

I'm not sure if there is a powershell command for this (Except if your DHCP Server run on windows server as ROLE)

Use Network monitoring tools instead

Please read this,
http://www.tech-faq.com/monitoring-and-troubleshooting-the-dhcp-server.html [http://www.tech-faq.com/monitoring-and-troubleshooting-the-dhcp-server.html]

System Administrator

David Pérez Bonilla

COG Lead Engineer

Shaun Vermaak

<div>
So if you need to leave the computer alone, then what I would do is unplug the network cable from that computer/machine take out a laptop (or other mobile device that has an RJ45 port) and plug the network cable into that and test away.
</div>


So if you need to leave the computer alone, then what I would do is unplug the network cable from that computer/machine take out a laptop (or other mobile device that has an RJ45 port) and plug the network cable into that and test away.

<div>
<div class="content wysiwyg-content">
I need to check the communications between a workstation and a dhcp server but without changing the network adapter configuration <br />
<br />
Is there a command in powershell or similar? <br />
<br />
Thank you.
</div>
</div>


I need to check the communications between a workstation and a dhcp server but without changing the network adapter configuration 

Is there a command in powershell or similar? 

Thank you.

Connection Test Network to DHCP Service

Windows PowerShell is a task automation and configuration management framework from Microsoft, consisting of a command-line shell and associated scripting language built on the .NET Framework. PowerShell provides full access to the Component Object Model (COM) and Windows Management Instrumentation (WMI), enabling administrators to perform administrative tasks on both local and remote Windows systems as well as WS-Management and Common Information Model (CIM) enabling management of remote Linux systems and network devices.

Powershell

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).

DHCP

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.