Link to home
Start Free TrialLog in
Avatar of gege Isgood
gege Isgood

asked on

IP listing per switch port

On Cisco core switch 3850, I need to get a list of end devices IP address and it associated port on the switch
Avatar of Nathan Hawkins
Nathan Hawkins
Flag of United States of America image

There is no single command to do that. Its a two step process and gets tedious. The process is to list what MAC's are on a port then you can trace the MAC to its IP.

This link gives you that info:
https://community.cisco.com/t5/other-network-architecture/find-ip-address-machine-connected-to-a-cisco-switch-port/td-p/604920
Avatar of noci
noci

You can do a sweep from nmap to survey active I addresses.
Within each LAN you can monitor the answers obtained and associate with MAC addresses.

On a switch you can at the same time look at the MAC/CAM table to find the associations between ports & mac addresses.
A possible shortcut is DHCP snooping, if it can be applied and if all hosts use DHCP.
ASKER CERTIFIED SOLUTION
Avatar of Soulja
Soulja
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
So, I am confused... You listed Soulja as the Asnwerer, but I stated what he said in my original post... So why on Earth didnt I at least get partial credit?
@Nathan Hawkins

I agree as well. I guess I got that street cred.. :)