Installing Hyper V server 2019 at Dell Power Edge 2019

You have to add the hyper-v role. How is your storage?

" You have to add the hyper-v role. How is your storage?"

The Storage is Dell SAN MD3200; any next direction please.

Thanks,
tjie

https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/get-started/install-the-hyper-v-role-on-windows-server

How far have you gotten?

Have you looked at hyper-v requirements, general practices?

Hi,

I have to work with the SAN firstly
It is in the network, but i cannot see it or connect it by its name

I want to reset this SAN to the factory setting; any help to start?

Thanks,
tjie

Please clarify, what kind of San?
On the host you need to use the iscsi initiator administrative tool if your connection is iscsi (over Ethernet)
If you gave FC connections, you need to add hba driver and then add San related tools.
Allocate the LUN//s to the hba/s.....

You are modifying your question with additional info.

To respond to questions we need full info as unlike people on site who can go and check things out, we can not.

The existing SAN are as the followings:

1)      Dell MD3200
There are 12 SAS Hard drives

2)      Dell Power Vault 124 T
I make a sketch of the FRONT and BACK of the above devices; some photos (Please see the attachment)
One port (which I put as “ X “); I do not know what it is; it looks like “a fiber connection”
SAN.pdf