asked on

Configuring EEM on 2960

EEM v 4.0 on Cisco 2960.

I am trying to no out my EEM Events on my Cisco 2960 but I can't determine the name!!!

SW1(config)# do show event manager history

That does not show the complete file name! I need the entire file name to remove it from EEM.

Ideas???

Predrag Jovic

show event manager environment all

show event manager history events

wrt1mea

ASKER

show event manager environment all......that didnt return anything

show event manager history events shows my 3 EEM applets like I was able to previously see.

When I try to no them out using the name showing, it says "No such applet"

...and I am looking at them!!!!

Predrag Jovic

EEM configuration can be found in configuration.

c892(config)#do sh run | inc event
event manager applet
event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.10.1 get-type exact entry-op ge entry-val "50" poll-interval 0.500
c892(config)# no event manager applet High_CPU

Maybe you already removed it?

wrt1mea

ASKER

Maybe so? But why does the event manager: show event manager history events shows my 3 EEM applets?

Does it show the history of what I have had previously? Seems odd that it would display events that are no longer there. But maybe so ????

ASKER CERTIFIED SOLUTION

Predrag Jovic

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

wrt1mea

ASKER

THANKS!

wrt1mea

ASKER

OK good! Thanks for the help....Just couldnt wrap my head around a removed event still showing up.

Predrag Jovic

You're welcome.