IP4IT Staff
asked on
How to plug Desktop Switch (TL-SF1008D) into APC Back-UPS Pro 1500
Hi,
We have an APC Back-UPS Pro 1500 and an 8-Port 10/100Mbps Desktop Switch (TL-SF1008D).
We wish to plug our switch into the UPS in case of power outage.
The UPS requires a kettle plug be plugged into it.
We only have a power plug that would go into wall socket for this switch so it won't plug into the UPS.
How would you recommend we plug our switch into our UPS?
Thanks,
Robbie
We have an APC Back-UPS Pro 1500 and an 8-Port 10/100Mbps Desktop Switch (TL-SF1008D).
We wish to plug our switch into the UPS in case of power outage.
The UPS requires a kettle plug be plugged into it.
We only have a power plug that would go into wall socket for this switch so it won't plug into the UPS.
How would you recommend we plug our switch into our UPS?
Thanks,
Robbie
Go to the shops and buy a C14 to mains cable. Without knowing your plug type I don't know what's on the end of your power brick.
As long as the voltage is the same you should be okay using an adapter cord. I'm not sure what exactly is a kettle plug, but since you are in Ireland, I'm thinking it's the same as other UK plugs?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.