leblanc
asked on
Cisco AP upgrade to autonomous IOS
I am trying to make my Cisco 3600 series from lightweight to autonomous. So all I need to do is to tftp the new IOS to the AP. The tftp is working fine. The issue is I only have 10MB of free space on the AP and it needs 13MB for the new IOS. I have been deleting files on my AP. But not sure why I could not get to 13MB free of space. Any help will be greatly appreciated. Below is the message after the tftp.
AP#
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Macronix Mirrorbit (00C2)
Xmodem file system is available.
flashfs[0]: 263 files, 15 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 20999680
flashfs[0]: Bytes available: 10998272
flashfs[0]: flashfs fsck took 18 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 7c:69:f6:60:80:2f
Ethernet speed is 1000 Mb - FULL Duplex
Mode button pressed.
Mode button held for at least 20 seconds.
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap3g2-k9w7-tar.default
examining image...
DPAA Set for Independent Mode
DPAA_INIT = 0x0
extracting info (279 bytes)
Image info:
Version Suffix: k9w7-.153-3.JJ
Image Name: ap3g2-k9w7-mx.153-3.JJ
Version Directory: ap3g2-k9w7-mx.153-3.JJ
Ios Image Size: 10721792
Total Image Size: 13865472
Image Feature: WIRELESS LAN
Image Family: AP3G2
Wireless Switch Management Version: 8.9.100.0
Not enough free space to download image first w/o extracting
deleting existing version(s)...
Deleting target version: flash:/ap3g2-k9w7-mx.153-3.JJ...done.
Deleting current version: flash:/ap3g2-rcvk9w8-mx...done.
Extracting files...
You may need to delete the current firmware first.
This question needs an answer!
Become an EE member today
7 DAY FREE TRIALMembers can start a 7-Day Free trial then enjoy unlimited access to the platform.
View membership options
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.