1902 Upgrade seems to break PXE

Samuel Egbaiyelo
Samuel Egbaiyelo used Ask the Experts™
on
I recently upgraded my configuration manager to 1902. After the upgrade, my PXE stopped working at all my distribution points.

I have two scenarios at different site
1. Windows Deployment Service encountered an error: Error Code: 0x000000f
2. Stuck at WDS Boot Manager version 0800 then give n error message.

Kindly see the attachment for the two errors at different sites
IMG_20191217_111130.jpg
2.jpg
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Samuel EgbaiyeloSCCM Administrator

Author

Commented:
After disabling the PXE on the DP, uninstalling and re-install WDS, and re-enabling PXE. The second scenerio disappeared and now showing Windows Deployment Service encountered an error: Error Code: 0x000000f

I have the same error trying to image from all my DPs
Leading Engineer
Commented:
Hi - did you update the boot images? Not sure the upgrade does it. It ought to...
Samuel EgbaiyeloSCCM Administrator

Author

Commented:
Thank you all.

Issue resolved.

I updated the Boot Image and everything returned back to normal.

The problem were:
1. I migrated from 1806 to 1810 and 2 days later I did 1810 to 1902 and finally did the 1902 hotfixes.
2. The upgrade updated the default bootimage (x64) which wasn't in-use

Thank you for your support.
Samuel EgbaiyeloSCCM Administrator

Author

Commented:
Thank you for your suggestion.

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial