We help IT Professionals succeed at work.

Firmware/Software level of Cisco 2900 Series Switch

SycamoreIT asked
I have a Cisco 2900 Series switch and I have CLI access to it, Ive been asked to provide firmware information of the switch, how can I pull that via the CLI?
Watch Question

Technical Consultant
Distinguished Expert 2019
show version

so this one (below) is Version 12.1(22)EA13 and its boot file is c2950-i6q4l2-mz.121-22.EA13.bin accordingly.

Switch>show version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA13, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by cisco Systems, Inc.
Compiled Fri 27-Feb-09 22:20 by amvarma
Image text-base: 0x80010000, data-base: 0x80570000
ROM: Bootstrap program is C2950 boot loader
Switch uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6q4l2-mz.121-22.EA13.bin"
cisco WS-C2950-12 (RC32300) processor (revision B0) with 20957K bytes of memory.
Processor board ID FAB0535Q22L
Last reset from system-reset
Running Standard Image
12 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:06:D6:AB:A0:40
Motherboard assembly number: 73-5782-08
Motherboard serial number: FAB0535BC1K
Model revision number: B0
Model number: WS-C2950-12
System serial number: FAB0535Q22L
Configuration register is 0xF

Open in new window



Cheers Pete  - nice one.
Pete LongTechnical Consultant
Distinguished Expert 2019