nickg5
asked on
Need to add to a 3D image of counter top layout.
Here are two images. One is a layout for a kitchen cabinet top. The other shows the existing top with has a 3.5 high and 1 inch thick board along the back. The layout is 3D I assume. What program can be used to add this board that runs along the back to the layout photo?
I'd go with a different color than the yellow so the counter top maker can see the back board. >> And with the added it needs to run along the back and flush against the bottom of the window as they have the window shown in the layout.
And in the layout I can just add text to show the height and thickness which are actually 3 9/16 x 7/8. I have Paint 3D but never done any 3D imaging. Thanks.
I'd go with a different color than the yellow so the counter top maker can see the back board. >> And with the added it needs to run along the back and flush against the bottom of the window as they have the window shown in the layout.
And in the layout I can just add text to show the height and thickness which are actually 3 9/16 x 7/8. I have Paint 3D but never done any 3D imaging. Thanks.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
thanks
ASKER