
nex3548.txt [https://filedb.experts-exchange.com/incoming/2020/02_w08/1444190/nex3548.txt]

nex3548.txt

<div>
What do the RADIUS logs show? Could be an issue on that side. I know that my RADIUS Servers (Microsoft NPS) have separate settings for which devices can connect, and then another section for which devices a user can authenticate from.
</div>


What do the RADIUS logs show? Could be an issue on that side. I know that my RADIUS Servers (Microsoft NPS) have separate settings for which devices can connect, and then another section for which devices a user can authenticate from.

Leadtheway

<div>
<p>Also is your radius server using the default ports 1812 and 1813? If not you'd need to specify the ports radius auth and accounting uses.</p>
</div>


Also is your radius server using the default ports 1812 and 1813? If not you'd need to specify the ports radius auth and accounting uses.

<div>
<div class="content wysiwyg-content">
I am trying to get radius setup on this new switch, &nbsp; Doing same thing I do for every switch. I get prompted to accept key, get the radius login and message but password not working. &nbsp;Confirmed the secrets match with server. &nbsp;I even have another 3548 I've copied exact. Not sure what I could have missed. Attached is config for another set of eyes
</div>
</div>


I am trying to get radius setup on this new switch,   Doing same thing I do for every switch. I get prompted to accept key, get the radius login and message but password not working.  Confirmed the secrets match with server.  I even have another 3548 I've copied exact. Not sure what I could have missed. Attached is config for another set of eyes

Nexus 3548 Radius config

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Cisco PIX is a dedicated hardware firewall appliance; the Cisco Adaptive Security Appliance (ASA) is a firewall and anti-malware security appliance that provides unified threat management and protection the PIX does not. Other Cisco devices and systems include routers, switches, storage networking, wireless and the software and hardware for PIX Firewall Manager (PFM), PIX Device Manager (PDM) and Adaptive Security Device Manager (ASDM).