We help IT Professionals succeed at work.
Get Started
Issue related to data receiving in tcp/ip sockets
Dear Experts
i am able to get the data on tcp client application with two different machines but when i am using the same application for third machine (Hematology Analyzer) i am not able to even connect it . on a test application provided by the manufacturer i am able to get the data. i am even more confused with the network settings of machine and laptop. machine has two type of ipaddresses, one for network ping and another for LIS purpose. The LIS purpose machine ip address never pings. Surprising thing is that testing application has mandated it to use the LIS IP Address to be must for the Laptop IP address i.e. LIS Ip address and Ip address of Laptop has to be same. i am not able to understand this why it has been mandated and why my client application is not able to get the data over tcp/ip protocol.
prescribed settings for the test application are attached which is more confusing for me. with these settings the data is received on the test application but with the same settings my application is not able to receive the data from the analyzer.
Kindly help to resolve. Thanks in advance.Instruction-of-Getting-Query-LIS-In.docx
i am able to get the data on tcp client application with two different machines but when i am using the same application for third machine (Hematology Analyzer) i am not able to even connect it . on a test application provided by the manufacturer i am able to get the data. i am even more confused with the network settings of machine and laptop. machine has two type of ipaddresses, one for network ping and another for LIS purpose. The LIS purpose machine ip address never pings. Surprising thing is that testing application has mandated it to use the LIS IP Address to be must for the Laptop IP address i.e. LIS Ip address and Ip address of Laptop has to be same. i am not able to understand this why it has been mandated and why my client application is not able to get the data over tcp/ip protocol.
prescribed settings for the test application are attached which is more confusing for me. with these settings the data is received on the test application but with the same settings my application is not able to receive the data from the analyzer.
Kindly help to resolve. Thanks in advance.Instruction-of-Getting-Query-LIS-In.docx
Why Experts Exchange?
Experts Exchange always has the answer, or at the least points me in the correct direction! It is like having another employee that is extremely experienced.
Jim Murphy
Programmer at Smart IT Solutions
When asked, what has been your best career decision?
Deciding to stick with EE.
Mohamed Asif
Technical Department Head
Being involved with EE helped me to grow personally and professionally.
Carl Webster
CTP, Sr Infrastructure Consultant
Ask ANY Question
Connect with Certified Experts to gain insight and support on specific technology challenges including:
- Troubleshooting
- Research
- Professional Opinions
Did You Know?
We've partnered with two important charities to provide clean water and computer science education to those who need it most. READ MORE