Yashy
asked on
Transferring rules from Checkpoint to Watchguard
Hi guys
We're going to need to export a load of configurations and policies from Checkpoint firewalls onto Watchguard ones.
Have any of you used any methods to do something similar with the above mentioned vendors or other third party ones?
Did you just do it manually or have you used tools that can do this or did you use script?
Thanks for helping
Yash
We're going to need to export a load of configurations and policies from Checkpoint firewalls onto Watchguard ones.
Have any of you used any methods to do something similar with the above mentioned vendors or other third party ones?
Did you just do it manually or have you used tools that can do this or did you use script?
Thanks for helping
Yash
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
There is another issue at play as well.
You have some company policy and that got translated into Checkpoint Rules - some things were changed because of non-exact matches for example.
You need to go from the ORIGINAL policies and translate them again to the new platform, and try to make it fit where it is too tight.
That might give the same rulesets if both platforms have the same quirks. Most probably there are different factors giving a new different ruleset.
You have some company policy and that got translated into Checkpoint Rules - some things were changed because of non-exact matches for example.
You need to go from the ORIGINAL policies and translate them again to the new platform, and try to make it fit where it is too tight.
That might give the same rulesets if both platforms have the same quirks. Most probably there are different factors giving a new different ruleset.
ASKER