Member_2_6492660_1
asked on
Veeam B&R Resetting CBT per job settings for active fulls failed Details
Veeam B&R version 10.0.0.4461
Windows 2019
VMware vcenter 6.7 ESXI 6.7 U3
I have many jobs running all work great.
At one point my network had two vCenters and this Veeam B& R was on vcenter 2.
Vcenter two crashed due to hard drive failureSo I added all ESXI Hosts from Vcenter 2 to my Vcenter 1
Recreated all the veeam backup replication and copy jobs.
My jobs are setup to do incremental backup and a full backup on Sunday.
When the full backup runs one of the 4 VM's in the job has this error
I have another job that has the same error only on the FULL Backup and only 1 VM of 5 in that job
It is always the Same VM in Both Jobs
10/11/2020 4:38:15 PM :: Resetting CBT per job settings for active fulls failed Details: Cannot complete login due to an incorrect user name or password.
Any ideas or suggestions
Thank you
Tom
Windows 2019
VMware vcenter 6.7 ESXI 6.7 U3
I have many jobs running all work great.
At one point my network had two vCenters and this Veeam B& R was on vcenter 2.
Vcenter two crashed due to hard drive failureSo I added all ESXI Hosts from Vcenter 2 to my Vcenter 1
Recreated all the veeam backup replication and copy jobs.
My jobs are setup to do incremental backup and a full backup on Sunday.
When the full backup runs one of the 4 VM's in the job has this error
I have another job that has the same error only on the FULL Backup and only 1 VM of 5 in that job
It is always the Same VM in Both Jobs
10/11/2020 4:38:15 PM :: Resetting CBT per job settings for active fulls failed Details: Cannot complete login due to an incorrect user name or password.
Any ideas or suggestions
Thank you
Tom
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Guys.
1. there are no credentials on this job. I do not use the guest processing feature that requires you to enter creds.
2. The Vcenter was restarted a while back
3. I removed the VM from the Job and added it back will have to see it that helps.
4. I will create a test backup with both VM in the job and see what happens with cbt enabled if that fails will turn off cbt
This is strand because the other 4 vms in this one job also came from the other vcenter and they work fine.
This one VM at one time was a Windows 8.1 computer and I upgraded it to Windows 10 It was in it own backup for some time and then I recently added it to the windows 10 backup job
Still odd that this is an issue of moving things around The other vcenter was removed from the Veeam B&R inventory
Thanks
I will posts more results after I test.
1. there are no credentials on this job. I do not use the guest processing feature that requires you to enter creds.
2. The Vcenter was restarted a while back
3. I removed the VM from the Job and added it back will have to see it that helps.
4. I will create a test backup with both VM in the job and see what happens with cbt enabled if that fails will turn off cbt
This is strand because the other 4 vms in this one job also came from the other vcenter and they work fine.
This one VM at one time was a Windows 8.1 computer and I upgraded it to Windows 10 It was in it own backup for some time and then I recently added it to the windows 10 backup job
Still odd that this is an issue of moving things around The other vcenter was removed from the Veeam B&R inventory
Thanks
I will posts more results after I test.
ASKER
Update
Created a test job for both VMs started a Active Full
And both gave same warning message as i indicated above
Next will be to run turning off CBT and run the test again
Will post results
Created a test job for both VMs started a Active Full
And both gave same warning message as i indicated above
Next will be to run turning off CBT and run the test again
Will post results
ASKER
Ok Guys
The job ran without warnings Active Full successfully with CBT off
I turned it back on with the credentials under guest processing and I got the warnings
10/13/2020 9:42:32 PM :: Resetting CBT per job settings for active fulls failed Details: Cannot complete login due to an incorrect user name or password.
I am not sure what is up with these two VM's
Any ideas?
The job ran without warnings Active Full successfully with CBT off
I turned it back on with the credentials under guest processing and I got the warnings
10/13/2020 9:42:32 PM :: Resetting CBT per job settings for active fulls failed Details: Cannot complete login due to an incorrect user name or password.
I am not sure what is up with these two VM's
Any ideas?
If there is a snapshot, delete it.
ASKER
Hello There
I checked no snap shots on either VM
I checked no snap shots on either VM
ASKER
What I did was create a new job and disabled the CBT feature for these two VMs'
That is a work around but not sure what the real issue is here.
Thanks
That is a work around but not sure what the real issue is here.
Thanks
And did you reboot vCenter Server?