sysnimda
asked on
How to configure a new subnet on a cisco switch
Hello -
I have 4 switched stacked WS-C2960S-48FPS-L and I am needing to setup a new IP address range for some new devices. This range will be a class C /24 (172.22.23.1-172.22.23.254). How would I go about doing that on the switches? We also have a wireless network, so I need to ensure this is working with that network as well. I truly appreciate all your help!
Thank you!
I have 4 switched stacked WS-C2960S-48FPS-L and I am needing to setup a new IP address range for some new devices. This range will be a class C /24 (172.22.23.1-172.22.23.254). How would I go about doing that on the switches? We also have a wireless network, so I need to ensure this is working with that network as well. I truly appreciate all your help!
Thank you!
ASKER
yes I need switch to hold IP address from that range
ASKER
separate VLANs
You do realize that 172.22 is a public not private ip subnet ?
ASKER
Can it be used Mr. Johnson?
actually I was wrong.. 172.16.xx - 172.31.255.255 xx is private address space
Ignore my previous comment
Ignore my previous comment
ASKER
No worries, thanks for checking.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Nice, thank you! Now, I have a wireless VLAN already and I want this new VLAN to communicate with that VLAN, how do I set that up? THANKS!
What does your routing?
Do you know the difference between a L2 VLAN and an L3 IP subnet?
Do you know the difference between a L2 VLAN and an L3 IP subnet?
ASKER
L3 IP Subnet is used to route and a L2 VLAN is just to segment my LAN.
On my core router I have these routes.
172.22.0.0/16 is variably subnetted, 11 subnets, 2 masks
C 172.22.24.0/24 is directly connected, Vlan124
C 172.22.31.0/24 is directly connected, Vlan131
C 172.22.20.0/22 is directly connected, Vlan120
C 172.22.10.0/24 is directly connected, Vlan110
C 172.22.11.0/24 is directly connected, Vlan111
C 172.22.8.0/24 is directly connected, Vlan108
C 172.22.9.0/24 is directly connected, Vlan109
C 172.22.14.0/24 is directly connected, Vlan114
C 172.22.13.0/24 is directly connected, Vlan113
C 172.22.1.0/24 is directly connected, Vlan101
C 172.22.7.0/24 is directly connected, Vlan107
S* 0.0.0.0/0 [1/0] via 172.22.7.1
On my core router I have these routes.
172.22.0.0/16 is variably subnetted, 11 subnets, 2 masks
C 172.22.24.0/24 is directly connected, Vlan124
C 172.22.31.0/24 is directly connected, Vlan131
C 172.22.20.0/22 is directly connected, Vlan120
C 172.22.10.0/24 is directly connected, Vlan110
C 172.22.11.0/24 is directly connected, Vlan111
C 172.22.8.0/24 is directly connected, Vlan108
C 172.22.9.0/24 is directly connected, Vlan109
C 172.22.14.0/24 is directly connected, Vlan114
C 172.22.13.0/24 is directly connected, Vlan113
C 172.22.1.0/24 is directly connected, Vlan101
C 172.22.7.0/24 is directly connected, Vlan107
S* 0.0.0.0/0 [1/0] via 172.22.7.1
On the core switch you need to create the L2 and L3 interfaces. On the L3 interface set the IP address.
To get an idea of how the interfaces are configured in your network, look at the running configuration.
To get an idea of how the interfaces are configured in your network, look at the running configuration.
Is this going to be a separate VLAN with a defined VLAN ID?
Do you need the switch to have an address on this network?
If the answer to both questions "no" then you probably don't have to configure anything at all.. If you do have VLANs or you need the switch to hold an IP address from that range, that's a different story