KLOGIT Engineers
asked on
PRTG Network Monitor and SNMP Sensors
I recently installed PRTG Network Monitor on Server A and added around 100 devices and standard auto-discovery sensors with no issues.
We were able to SNMP sensors for some servers, but most of the servers that were created with template A the SNMP sensor cant be added. I've mirrored SNMP Service settings from the servers that do work, but that didn't help.
Firewall is off in the network
Any ideas?
We were able to SNMP sensors for some servers, but most of the servers that were created with template A the SNMP sensor cant be added. I've mirrored SNMP Service settings from the servers that do work, but that didn't help.
Firewall is off in the network
Any ideas?
Seems likely that SNMP isn't installed. There are 3 pieces to it.
ASKER
It is installed and I followed directions here, just in case. Here is info from prtg snmp tester tool.
Enable SNMP debugging on the Windows server to see if the packets are arriving.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.