Cisco Anyconnect Auto Upgrade hanging
Hello
Having issues with the AnyConnect software upgrading (in particular using the start before login module) when a device connects to the ASA firewall.
The software connects fine and appeard to upgrade the modules (SBL, Dart, VPN and Security) then sit there on the connecting screen with the cancel button option. By this stage i believe its upgraded fine and i had to cancel the login and it showed the VPN connected so i duly logged on and it seemed to be ok albeit after a reconnect).
My other machine did the same but this time i left it a few seconds longer and the connecting screen with cancel option went back to the logon screen. On pressing a key (seemed to be at the ctrl + alt + delete stage) i had the logon to windows screen and again i logged in fine.
The upgrade process seems floored somewhere here. I have tested this on another machine that isn't corporate and it upgraded fine (just had VPN module) and another machine that logged into windows first then the VPN which upgraded and also prompted for a reboot (v4.6 to v4.10 i believe.
Any ideas?
Having issues with the AnyConnect software upgrading (in particular using the start before login module) when a device connects to the ASA firewall.
The software connects fine and appeard to upgrade the modules (SBL, Dart, VPN and Security) then sit there on the connecting screen with the cancel button option. By this stage i believe its upgraded fine and i had to cancel the login and it showed the VPN connected so i duly logged on and it seemed to be ok albeit after a reconnect).
My other machine did the same but this time i left it a few seconds longer and the connecting screen with cancel option went back to the logon screen. On pressing a key (seemed to be at the ctrl + alt + delete stage) i had the logon to windows screen and again i logged in fine.
The upgrade process seems floored somewhere here. I have tested this on another machine that isn't corporate and it upgraded fine (just had VPN module) and another machine that logged into windows first then the VPN which upgraded and also prompted for a reboot (v4.6 to v4.10 i believe.
Any ideas?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Was timing issue. Seemed to work but required user to be patient and wait for the screen to return to logon for the upgrade to complete.
ASKER
didnt require a reboot, just patients with a slow connection. thereafter the machine required a ctrl alt delete once it had finished (which it didnt report)
ASKER