heze54
asked on
Disable SMB1
Hi,
I´m removing SMB1 feature from AD servers.
Must be also removed from all servers or only AD servers?
Any advise/idea?
Regards
I´m removing SMB1 feature from AD servers.
Must be also removed from all servers or only AD servers?
Any advise/idea?
Regards
ASKER
Hi,
I ´ve some Win 2012 R2 with Support and according to your responde, must be disable, correct?
Regards and Thanks
I ´ve some Win 2012 R2 with Support and according to your responde, must be disable, correct?
Regards and Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Make sure you don't have any 'non windows devices' speaking to it!
SMB1 Is Dead? (Unfortunately Not Yet)
</P>
SMB1 Is Dead? (Unfortunately Not Yet)
</P>
ASKER
Hi,
i used Set-SmbServerConfiguration -AuditSmb1Access $true to check computers and only 1 used SMB1
Regards
i used Set-SmbServerConfiguration -AuditSmb1Access $true to check computers and only 1 used SMB1
Regards
Set you are enabling what you want to disable, you should use get to get the current smbv1 status.
Or set it to false.
Note the warning that disabling smbv1 might prevent older resources from access.
Or set it to false.
Note the warning that disabling smbv1 might prevent older resources from access.
unless someone installed it manually, nothing to do
if it was installed manually, you can remove
How to remove SMBv1
https://docs.microsoft.com/en-us/windows-server/storage/file-server/troubleshoot/detect-enable-and-disable-smbv1-v2-v3#how-to-remove-smbv1