ADRIANA P
asked on
create lookup for PAIRS to byset 4n
4n to add byset from PAIR HOR
1-in CB1 create an button (called it: PAIRS SETS) to open an subfrom to look up
( subform like in RNUM button )
2- after the look up then create the bySet in SETS sheets
as shown EXAMPLE in SETS sheet
3-from columns:
AZ , AU , AV , AW , AX , BF, BX , BZ , BC
Just to avoid confusion if other experts look at this question, when you say "subform" you really should instead say "userform".
ASKER
Thanks Best Expert !!
my correction you are rigth is an userform.
my correction you are rigth is an userform.
I assume that when you click the PAIRS SETS button you want the userform to show the values from column CB. What do columns AZ , AU , AV , AW , AX , BF, BX , BZ , BC have to do with that?
Supongo que cuando hace clic en el botón CONJUNTOS DE PARES, desea que el formulario de usuario muestre los valores de la columna CB. ¿Qué tienen que ver las columnas AZ, AU, AV, AW, AX, BF, BX, BZ, BC con eso?
Supongo que cuando hace clic en el botón CONJUNTOS DE PARES, desea que el formulario de usuario muestre los valores de la columna CB. ¿Qué tienen que ver las columnas AZ, AU, AV, AW, AX, BF, BX, BZ, BC con eso?
ASKER
columns AZ , AU , AV , AW , AX , BF, BX , BZ , BC have to do with that?
Ideally, I would be able to select the columns that I want to analyze at the moment, but since I cannot do so
I am putting the columns that I need to analyze
These columns are important because I need to see what happens when they all coincide with the same index in this case the index is the number that is in the CB column
Although you didn't say so (and you really should) it looks like what you are showing in the SETS sheet are the nine columns AZ, AU, AV, AW, AX, BF, BX, BZ and BC and I have some questions about that worksheet.
Aunque no lo dijo (y realmente debería), parece que lo que está mostrando en la hoja SETS son las nueve columnas AZ, AU, AV, AW, AX, BF, BX, BZ y BC y tengo algunas preguntas sobre esa hoja de trabajo.
- Do you want to show the date as we do in column 'A' of the RNUM sheet?
- Are there times when you might not want to show all nine columns?
- Are there times when you might want to show columns that are not included in the nine columns you referred to?
Aunque no lo dijo (y realmente debería), parece que lo que está mostrando en la hoja SETS son las nueve columnas AZ, AU, AV, AW, AX, BF, BX, BZ y BC y tengo algunas preguntas sobre esa hoja de trabajo.
- ¿Quiere mostrar la fecha como lo hacemos en la columna 'A' de la hoja RNUM?
- ¿Hay ocasiones en las que es posible que no desee mostrar las nueve columnas?
- ¿Hay ocasiones en las que podría querer mostrar columnas que no están incluidas en las nueve columnas a las que se refirió?
ASKER
- Do you want to show the date as we do in column 'A' of the RNUM sheet?
yes!! - Are there times when you might not want to show all nine columns?
yes ! - Are there times when you might want to show columns that are not included in the nine columns you referred to?
yes !
For #3 I need a list of all the columns you might ever want to see on the SETS sheet.
Para el n. ° 3 necesito una lista de todas las columnas que quizás desee ver en la hoja SETS.
Para el n. ° 3 necesito una lista de todas las columnas que quizás desee ver en la hoja SETS.
ASKER
columns :
B
AU
AV
AW
AX
AZ
BF
BP
BX
BZ
CB
CC
CG
CI
CJ
CL
DF
DL
DT
EA
EN
EO
EQ
ES
EV
EX
EY
FA
FC
FH
FO
GJ
GL
GN
GP
B
AU
AV
AW
AX
AZ
BF
BP
BX
BZ
CB
CC
CG
CI
CJ
CL
DF
DL
DT
EA
EN
EO
EQ
ES
EV
EX
EY
FA
FC
FH
FO
GJ
GL
GN
GP
I just noticed that in the workbook you attached that 14W2012 is missing the data for Friday AM. If you can attach a workbook that has that day's data then I can copy it.
It's worse than that. To be safe I'll need to copy all the data.
ASKER
i get that worked just a minute
ASKER
14W2012 is missing the data for Friday for some reason like Holy Friday not avaliable
ASKER
here the dates fixed
4N_toadd_dt.xlsx
4N_toadd_dt.xlsx
I haven't yet corrected the data and I also haven't yet added the counts and some other fancy things to the top of the SETS form, but click the new PAIRS SETS button and let me know if you are happy with what I've done so far.
Todavía no he corregido los datos y tampoco he agregado los recuentos y algunas otras cosas elegantes en la parte superior del formulario SETS, pero haga clic en el nuevo botón PAIRS SETS y avíseme si está satisfecho con lo que yo ' lo he hecho hasta ahora.
29224260.xlsb
Todavía no he corregido los datos y tampoco he agregado los recuentos y algunas otras cosas elegantes en la parte superior del formulario SETS, pero haga clic en el nuevo botón PAIRS SETS y avíseme si está satisfecho con lo que yo ' lo he hecho hasta ahora.
29224260.xlsb
ASKER
Looking Good !
ASKER
You are the best !!!
no body will do better job
no body will do better job
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Great Job
Best Expert !
working as expected
Best Expert !
working as expected
ASKER
Need make un adjustment
in the SETs sheet
I need the result to be 2 sets before the index set
and 10 down the index set
that is, 2 before and 10 after
Please!!!
in the SETs sheet
I need the result to be 2 sets before the index set
and 10 down the index set
that is, 2 before and 10 after
Please!!!
Gave you filled in any missing data? If so I need the updated workbook.
ASKER
Everything is working fine !!
but I need there to be 2 sets before the index set and 10 sets after
2 upper and 10 donw
but I need there to be 2 sets before the index set and 10 sets after
2 upper and 10 donw
I understand that. I was referring to the missing data that I pointed out and I was asking if you made any changes to the missing data, and if you did that then I would need a copy of the updated workbook.
Entiendo que. Me refería a los datos faltantes que señalé y le estaba preguntando si hizo algún cambio en los datos faltantes, y si lo hizo, necesitaría una copia del libro de trabajo actualizado.
Entiendo que. Me refería a los datos faltantes que señalé y le estaba preguntando si hizo algún cambio en los datos faltantes, y si lo hizo, necesitaría una copia del libro de trabajo actualizado.
ASKER
ASKER
Sheet1 like row 14 columns M, N and O
in this row 14 and columns M, N, O there are no data for that day
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
in this row 14 and columns M, N, O there are no data for that day
I mean that it is not your error, nor is it my error that it is a holiday (Good Friday) and there is no data for that day ...
I checked if there was data for that day and there can be no or it will be a holiday
Okay, I believe there was data there previously but I'm not 100% positive. But what about the dates in this picture I attached above?
ASKER
Okay, I believe there was data there previously but I'm not 100% positive. But what about the dates in this picture I attached above?
Those dates the data is fine, only the dates had to be restored but it is already corrected
If you aren't worried about the "missing" data then I'm not, but it's strange that in all the time I've been working with you that I never noticed before.
Please open a new question for AZ and I'll try to fix it.
Si no está preocupado por los datos "faltantes", entonces no lo estoy, pero es extraño que en todo el tiempo que he estado trabajando con usted nunca lo haya notado antes.
Abra una nueva pregunta para AZ e intentaré solucionarlo.
Please open a new question for AZ and I'll try to fix it.
Si no está preocupado por los datos "faltantes", entonces no lo estoy, pero es extraño que en todo el tiempo que he estado trabajando con usted nunca lo haya notado antes.
Abra una nueva pregunta para AZ e intentaré solucionarlo.
ASKER
ok ....