ADRIANA P
asked on
add userform to columns
1- create userform for each column from AL to AZ
in CONSE sheet
2- each column is an key
3- add columns from columns D to AZ in the userforms
this is the user fom needed
ASKER
ok we are talking about two different situations
1-one is what columns are going to be in the useform (but not as keys)
2- another is that columns are going to be keys
1-one is what columns are going to be in the useform (but not as keys)
2- another is that columns are going to be keys
Are AL to AZ the keys?
ASKER
yes
If AL to AZ are the keys then it doesn't make sense to me that D to AZ should be the columns. The columns should probably just be M to P with D also showing up in the output.
Si AL a AZ son las claves, entonces no tiene sentido para mí que D a AZ deberían ser las columnas. Las columnas probablemente deberían ser solo de M a P con D también apareciendo en la salida.
Si AL a AZ son las claves, entonces no tiene sentido para mí que D a AZ deberían ser las columnas. Las columnas probablemente deberían ser solo de M a P con D también apareciendo en la salida.
That doesn't make sense either, so please give me an example of the columns and keys you might select.
ASKER
Well what I'm looking for is to see comparisons
and here we have a good opportunity to compare according to the situation
when I talk about the columns to see in the userform
I mean that from column D to AZ I can choose which would be the output as needed
for example first user form in column R3
column R is the key so I can choose according to need from D to AZ the columns that I need to compare
columns K would always be in the output
and here we have a good opportunity to compare according to the situation
when I talk about the columns to see in the userform
I mean that from column D to AZ I can choose which would be the output as needed
for example first user form in column R3
column R is the key so I can choose according to need from D to AZ the columns that I need to compare
columns K would always be in the output
Rather than having more than 20 userforms on the CONSE worksheet, would it be okay if there was just one userform that requires you to first select the key column?
En lugar de tener más de 20 formularios de usuario en la hoja de trabajo CONSE, ¿estaría bien si solo hubiera un formulario de usuario que requiera que primero seleccione la columna clave?
En lugar de tener más de 20 formularios de usuario en la hoja de trabajo CONSE, ¿estaría bien si solo hubiera un formulario de usuario que requiera que primero seleccione la columna clave?
ASKER
Yes!!!
that would be Tera!
that would be Tera!
I'm still having trouble understanding what you need, so please describe what you want to see in the userform after column 'R' is selected.
Sigo teniendo problemas para entender lo que necesita, así que describa lo que desea ver en el formulario de usuario después de seleccionar la columna 'R'.
Sigo teniendo problemas para entender lo que necesita, así que describa lo que desea ver en el formulario de usuario después de seleccionar la columna 'R'.
ASKER
ASKER
The detail is that each column is a different key
and you have to make a user form for each one
and you have to make a user form for each one
In the userform the numbers in the ORDs column will always be the same. True or false?
ASKER
True
ASKER
but that is because we use the ORDFORM as sample so ORD is the Key (sheet1 BF1)
So if after selecting your proposed button "1" and selecting column 'AM' in the userform, how would the output be different if I select button "2" (assume it is in column s) and select column 'AM' in the userform?
Entonces, si después de seleccionar el botón propuesto "1" y seleccionar la columna 'AM' en el formulario de usuario, ¿cómo sería diferente la salida si selecciono el botón "2" (supongo que está en la columna s) y selecciono la columna 'AM' en el formulario de usuario ?
Entonces, si después de seleccionar el botón propuesto "1" y seleccionar la columna 'AM' en el formulario de usuario, ¿cómo sería diferente la salida si selecciono el botón "2" (supongo que está en la columna s) y selecciono la columna 'AM' en el formulario de usuario ?
ASKER
Excuse me, I should have talked about the AL column, not the R column.
AL is the key and the other columns would be in the columns section to be selected with a check mark as needed
if later I wanted to do the column AM
I would have to have an AM3 button that would open a userform with the Am column as the key and columns to select
AL is the key and the other columns would be in the columns section to be selected with a check mark as needed
if later I wanted to do the column AM
I would have to have an AM3 button that would open a userform with the Am column as the key and columns to select
So are you saying that there will always be just one entry in the userform's left column? If so then we don't need the left userform column as long as somewhere in the userform I show "AM"). Do you agree?
Entonces, ¿estás diciendo que siempre habrá una sola entrada en la columna izquierda del formulario de usuario? Si es así, no necesitamos la columna de formulario de usuario de la izquierda siempre que en algún lugar del formulario de usuario muestre "AM"). ¿Estás de acuerdo?
Entonces, ¿estás diciendo que siempre habrá una sola entrada en la columna izquierda del formulario de usuario? Si es así, no necesitamos la columna de formulario de usuario de la izquierda siempre que en algún lugar del formulario de usuario muestre "AM"). ¿Estás de acuerdo?
ASKER
Do you agree?
ok I Agree
( in this sample column AL is the Look Up column then it call the others relatives )
ok I Agree
( in this sample column AL is the Look Up column then it call the others relatives )
I don't get it. Let's assume you click button "1", and then you select columns M and AM as the columns. Please use the SETS sheet to show me a picture of the first few rows of what you would like the results to look like.
ASKER
Best Expert !!! the best way to explain it in a few words
Why don't you use the form in sheet sheet1 BF1
the ORDFORM button is the best example
but this time applied to the CONSE sheet
and so on for 1 2 3 4 5 6
I would have to make a button for home one
Why don't you use the form in sheet sheet1 BF1
the ORDFORM button is the best example
but this time applied to the CONSE sheet
and so on for 1 2 3 4 5 6
I would have to make a button for home one
Okay I can do what ORDFORM does but why did you talk about a button on column AL, AM, etcetera?
ASKER
AL is an Key column
AM is an Key column
AN is an key column
same to AZ column
I am parsing the keys by column
the userfom (how is ORDFORM) does not let me select the keys only the columns that accompany the key
that means I need a button for each column which is a key
AM is an Key column
AN is an key column
same to AZ column
I am parsing the keys by column
the userfom (how is ORDFORM) does not let me select the keys only the columns that accompany the key
that means I need a button for each column which is a key
Let's assume you click button "1", and then you select columns M and AM as the columns. Please use the SETS sheet to show me a picture of the first few rows of what you would like the results to look like.Please do what I asked you to do.
ASKER
ASKER
it would be helpful to be able to select the columns that I want to see in the output
Try this. This is just a test to see if the userform shows what you want.
29230885.xlsb
29230885.xlsb
ASKER
a marvel !!
ASKER
is not working but is in the best way ToGo
What do you mean when you say "is not working"?
ASKER
but it is the necessary functionality once it is finished
Did you see this comment of mine?
This is just a test to see if the userform shows what you want.
ASKER
good to go
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
use "Center Across Selection" instead.ok
ASKER
Working !!
can be columns R to W and columns AA to AF and AJ ?? in the columns to be selected
so i cant have to be back for
can be columns R to W and columns AA to AF and AJ ?? in the columns to be selected
so i cant have to be back for
Are you referring to columns that can be selected before the userform is shown?
¿Se refiere a las columnas que se pueden seleccionar antes de que se muestre el formulario de usuario?
¿Se refiere a las columnas que se pueden seleccionar antes de que se muestre el formulario de usuario?
ASKER
Are you referring to columns that can be selected before the userform is shown?
ok i need see them after i select the key (in the select with check mark section)
ok i need see them after i select the key (in the select with check mark section)
ASKER
something that I also need is to see the selected column in the output
I don't think it's practical to include R to W in the columns that can be selected, and that's because
1) If you choose a number like 01 in column R, it will result in 125 columns on the SETS sheet and in my opinion that's too many to understand, and
2) that will take a VERY long time
No creo que sea práctico incluir R a W en las columnas que se pueden seleccionar, y eso es porque
1) Si elige un número como 01 en la columna R, resultará en 125 columnas en la hoja SETS y, en mi opinión, son demasiadas para entender, y
2) eso tomará MUCHO tiempo
1) If you choose a number like 01 in column R, it will result in 125 columns on the SETS sheet and in my opinion that's too many to understand, and
2) that will take a VERY long time
No creo que sea práctico incluir R a W en las columnas que se pueden seleccionar, y eso es porque
1) Si elige un número como 01 en la columna R, resultará en 125 columnas en la hoja SETS y, en mi opinión, son demasiadas para entender, y
2) eso tomará MUCHO tiempo
ASKER
I agree, very well thought out
but I don't want them to be keys but rather that I can select them with the key
that is, after selecting the key
but I don't want them to be keys but rather that I can select them with the key
that is, after selecting the key
R to AJ are already in the 'Columns' column. So what if anything do you need me to do?
R a AJ ya están en la columna 'Columns'. Entonces, ¿qué pasa si necesitas que haga algo?
R a AJ ya están en la columna 'Columns'. Entonces, ¿qué pasa si necesitas que haga algo?
ASKER
you're right it's there
it's a great job
Great Job Best Expert!
it's a great job
Great Job Best Expert!
ASKER
Just The Very Best !
or do you want