Dextor03
asked on
HP Disk Array
We have a HP ProLiant ML350 Gen10 server which is running low on disk space. I would like to install 2 new 1.2TB hard drives and configure them as Raid 1. Is it possible to add the two new drives and create a new Array without disrupting the existing setup? I haven't done this before and am looking for the best way to approach it.
Yes, just physically add them, open the Smart Storage Administrator and configure from there. What OS do you have?
ASKER
Windows Server 2016 Standard.
SSA is at https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_30e7e2f25b5e4076a7e7417929 if you do not have it installed, it's pretty obvious how to use but if you get stuck post a screen shot.
ASKER
Perfect, I've installed that and have connected the two new hard drives. Do I just create a new array and add the two new disks? Won't affect the existing arrays?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thank you. That's working now.