Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x

DHCP

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).

Share tech news, updates, or what's on your mind.

Sign up to Post

I've had a couple of instances were Windows 10 is being allocated IPv6 addresses despite there not being a IPv6 DHCP Server on the network.  It's caused some Domain connectivity issues.  Anyone else seen anything similar to this?
0
 
LVL 35

Expert Comment

by:Shaun Vermaak
That is an IPv6 site-local address. MS recommends against disabling IPv6. I would add IPv6 range to DHCP (https://www.ultratools.com/tools/rangeGenerator) because site-local addresses sometimes contains the MAC address
0
 
LVL 22

Author Comment

by:David Atkin
That's what we've been doing, disabling IPv6.  I've struggled to find any other information about the problem which is why I've asked really.

@Shaun, thank you for the site local address info
0
Free learning courses: Active Directory Deep Dive
LVL 1
Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

2012 SCCM PXE BOOT Error.

When I try to boot from the network it detects DHCP and will ended error with 0xc0000098.
attached error images on same.

Done with all below things.

1. Added operating system image and distributed, added operating system upgrade package and distributed.
2. Boot images properties selected deploy this boot image from the PXe .
3. In Distribution Point properties I have checked enabled pxe support for clients.
4. DHCP 66,67 option selected entered value.

Please help anyone on this.
IMG_8550.JPGIMG_8551.JPGIMG_8553.JPG


 
0
 

Expert Comment

by:farid jan
if it didn't help. probably your boot files are not correct boot image.
0
 
LVL 12

Administrative Comment

by:Andrew Leniart
Hi  Bharath,

Welcome to Experts Exchange.

What you have done is made a "Post" here.

To get expert help, you need to "Ask a Question" so that more experts are able to see that you need help. Click the Big blue button near the top of your screen.

Ask-a-Question.png

The following link also explains more about asking for help at Experts Exchange..
http://support.experts-exchange.com/customer/portal/articles/336330

Regards,
Andrew
EE Topic Advisor
0

DHCP

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).