Networking Protocols

11K

Solutions

16K

Contributors

Networking software modules are interfaced with a framework implemented on the machine's operating system that implements the networking functionality of the operating system. The best known frameworks are the TCP/IP model and the OSI model. Systems typically do not use a single protocol to handle a transmission. Instead they use a set of cooperating protocols, sometimes called a protocol family or protocol suite.[9] Some of the best known protocol suites include: IPX/SPX, X.25, AX.25, AppleTalk and TCP/IP. Other protocols indirectly related to networking include the hypertext transfer protocol (HTTP) and its related technologies, Dynamic Host Configuration Protocol (DHCP), Domain Name Server (DNS) and other Internet protocols.

Share tech news, updates, or what's on your mind.

Sign up to Post

Hi all, please am submitting a CRQ for a simple static route via vrf
i.e.
ip route vrf  (vrf name) <ip address/mask> next hop.
I know it will not be approve if I did not put a statement about testing.
Please can anyone suggest any simple testing statement for static routing?
0
When issuing the summary-address in EIGRP, does it require at least one subnet existed under 10.16.0.0/16 ?


ip summary-address eigrp 1  10.16.0.0 255.255.0.0 5.
0
Locally injected routed is better than iBGP / eBGP learned. What is locally injected routed ? Is it the network specified by command network under BGP process ?

What is the difference between Origin "i" and Neighbor Type "i" ? Are they both refer to neighbor type ?

Thx

BGP.pngP
1
Hello All,

I found "IPsec (ESP) packet dropped" events in attempts section in Sonicwall GMS.
Can anyone help me to resolve this issue.

Thanks
Yogiraj Pattani
0
Hello experts one of our servers has a TON of DCOM 10009 errors.  The error is hapening because DCOM is attempting to communicate with a non existant server.
Error message:
DCOM was unable to communicate with the computer xxx-xxx using any of the configured protocols.
0
My wan Ip and public ip are different..Please help me...I first had a dlink router but then I changed my ISP and the router too..Port forwarding was first working but now I tried Port forwarding but its not working..
0
We were trying into set up a SSL VPN on a TZ215 Sonicwall - which we have done before for other customers but we keep getting Server is not reachable on this one.  We setup HTTPS on user login on Sonicwall; turned on WAN on SSL-VPN, using port 4433; using ten IP's not used on network; used Default DNS settings; added two users, assigned to SSL VPN and Local Subnets.  We are using the latest version of Netextender - checked the server IP by doing a Whatismyip and then used that with :4433 and LocalDomain but keep getting the server is not reachable - have rechecked settings - not sure what else to look at.
0
I would like to have clear idea about the difference between the commands below, when used in EIGRP:
Bandwidth <Value>
Example : Bandwidth 256

Ip Bandwidth-percent EIGRP <EIGRP AS>  <Percent Value>

example : ip Bandwidth-percent EIGRP 1 60

when shoud I use one and not the other ?


Thank you
0
We have seen that SNMP uses UDP as its transport protocol.  Why was UDP chosen over TCP?
0
We were having a bad quality audio during a large conf. call (around 45 attendees) on Lync and customer thinks it is coming from lack of CoS configuration on LAN devices. Do switches (L2) also need to have a CoS Configuration? Is there an approved std. template for Lync Voice/Video ports etc. ?

Thanks;
1
I have  router R1 connected to router R2.
R1 has some loopbacks and the networks that the loopbacks are on, are advertised to EIGRP

R1 has some Networks(172.16.0.0 0.0.255.255) that I need to filter out, so that they do not end up in R2 routing table:
on R1 , I have created Route Map , but before even I specify anything in Access-List and make route map match the Access-list . I have found that the Network 172.16.0.0 has already  been filtered out from R2 routing table... I wonder what has filtered it out .



R2(config)#do sh ip route | inc 172.16
R2(config)#

you see there is nothing about 172.16.0.0  in R2
Thanks



R1(config-route-map)#    do sh ip interface br
Interface                  IP-Address      OK? Method Status                Protocol
FastEthernet0/0            192.168.12.1    YES NVRAM  up                    up      
FastEthernet0/1            unassigned      YES NVRAM  administratively down down    
FastEthernet1/0            unassigned      YES NVRAM  administratively down down    
FastEthernet1/1            unassigned      YES NVRAM  administratively down down    
Loopback0                  172.16.0.1      YES manual up                    up      
Loopback1                  172.16.2.1      YES manual up                    up      
Loopback2                  172.16.3.1      YES manual up                    up      
R1(config-route-map)#

Open in new window






 
R1(config-route-map)#do sh run
Building configuration...

Current 

Open in new window

0
We have ten gigabit interfaces. How much tunneled traffic would the device be able to push?
0
I have 2 routers  R1 directly connected to R2. R1 has a loopback interface with ip address 1.1.1.1/32
However in EIGRP when I advertised the loopback network  I used:
router eigrp 1
 network 1.1.1.0 0.0.0.255

Now if I go to R2 routing table I see that route showing as:
R2#sh ip route eigrp
Gateway of last resort is not set

      1.0.0.0/32 is subnetted, 1 subnets
D        1.1.1.1 [90/156160] via 192.168.12.1, 00:06:20, FastEthernet0/0

***I thought it would show as /24 instead 32

Any idea ?

Thank you
0
Any Experts to explain the meaning of Default Networks in the routing tables below:

I see "*"  next to C* and D*
what does that mean ?

Thank you

R2#sh ip route connected 
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, + - replicated route

Gateway of last resort is not set

      192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.12.0/24 is directly connected, FastEthernet1/0
L        192.168.12.2/32 is directly connected, FastEthernet1/0
 *    192.168.23.0/24 is variably subnetted, 2 subnets, 2 masks
C*       192.168.23.0/24 is directly connected, FastEthernet0/0
L        192.168.23.2/32 is directly connected, FastEthernet0/0
R2#

Open in new window


R1#sh ip route eigrp
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, + - replicated route

Gateway of last resort is not set

D*    192.168.23.0/24 [90/30720] via 192.168.12.2, 00:01:47, FastEthernet0/0
R1#

Open in new window

0
Hi, I have a weblogic server running with different port numbers for HTTP and HTTPS. In our workstation we setup HTTP pointing to same port in the ISSPROXY.INI file. We could access from the local IIS URL to connect to the weblogic server; but when try to connect to secured server from IIS gets 2 different errors in the event viewer Event ID 1000 and Event ID 1001. below are the errors captured

EVENT ID 1000:

Faulting application name: w3wp.exe, version: 8.5.9600.16384, time stamp: 0x5215df96
Faulting module name: iisproxy.dll, version: 0.0.0.0, time stamp: 0x59966438
Exception code: 0xc0000005
Fault offset: 0x0000000000030410
Faulting process id: 0x2514
Faulting application start time: 0x01d35a3fff6328df
Faulting application path: c:\windows\system32\inetsrv\w3wp.exe
Faulting module path: \\?\C:\xxxxxx\XXXXXXXXX\lib\iisproxy.dll
Report Id: 3dddc54c-c633-11e7-812e-005056886b10
Faulting package full name:
Faulting package-relative application ID:


EVENT ID: 1001
----------------------

Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: w3wp.exe
P2: 8.5.9600.16384
P3: 5215df96
P4: iisproxy.dll
P5: 0.0.0.0
P6: 59966438
P7: c0000005
P8: 0000000000030410
P9:
P10:

Attached files:

These files may be available here:



Our iisproxy.ini has the below information:
--------------------------------------------------------------

ISSPROXY.INI

WebLogicHost=ssl-server-name
0
eiI configured EIGRP in R1 and R2 , but for some reason I cannot ping from R1 to 192.168.23.3, even though there is an EIGRP route in R1 for 192.168.23.0

1#sh run | sec eigrp
router eigrp 1
 network 192.168.12.0
R1#

Open in new window


router eigrp 1
 network 0.0.0.0
ip route 0.0.0.0 0.0.0.0 FastEthernet0/0

Open in new window



R1#sh ip route eigrp

D*    0.0.0.0/0 [90/30720] via 192.168.12.2, 00:06:03, FastEthernet0/0
D     192.168.23.0/24 [90/30720] via 192.168.12.2, 00:06:03, FastEthernet0/0
R1#

Open in new window


I cannot ping  R3 from R1



R1#ping 192.168.23.3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.23.3, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R1#

FRom R2 I can ping:
R2#ping 192.168.23.3

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.23.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 12/19/24 ms
R2#
Screen-Shot-2017-11-09-at-8.38.50-PM.png
0
A company I am supporting has a SonicWALL TZ600 firewall.

We need to audit and determine how much internet bandwidth each user is using and what type of bandwidth is being used (for streaming video, streaming audio, file downloads, etc.)

How can this be setup within the SonicWALL TZ600 firewall?
0
any of you ever seen a lan ip that starts with 205.162.2.x ?   is this normal?
0
In the example blow - Juniper firewall has heard from two WAN routers of a default route via OSPF.
It seems basically happenchance that 13.79.23.63 is the preferred default route. What could I do on the juniper to make 13.79.23.63 to always and purposely be chosen over the .62?

myjuniper> show route
0.0.0.0/0          *[OSPF/150] 1w6d 16:05:01, metric 26, tag 0
                      to 13.79.23.62 via reth0.0
                    > to 13.79.23.63 via reth0.0
0
Hi;
How do we find out if a given ACL statemet in acl set (Cisco) did have had a match in past, that this on running traffic if certain IP Address and port had a match?

Thanks;
0
EIGRP Lab example for Query Scoping.

I have read about EIGRP Scoping , and in most of articles they recommend Summarization at the Edge router. I have tried that, and enabled Debug EIGRP Packets Query on other routers, and shut down interface on one of the routers behind the Edge router, but I still saw a Query sent by the Edge Router to other routers.

I am not sure if that's normal behaviour or the lab is not the right set up to test EIGRP Query Scoping.

Any Lab Example from EIGRP Expert that demonstartes EIGRP Query Scoping might  help understand this topic..

Thank you
0
When does EIGRP Equal Load-Balancing happen

I have managed to Test Unequal load-balancing using Traceroute multiple times and quickly.

However for Equal Cost , I tried Traceroute multiple times and quickly , but it keeps going through one path..

I am not sure now if Equal Cost Load-balancing happens only when there is congestion on one path...if so why this does not happen on Unequal Cost..

Any Clarification will be very much appreciated.

Thank you
0
Imagine a remote site - call it Dallas - with two WAN routers. Router WAN1 connects to the data center in Denver over a 1Gbps circuit and router WAN2 connects to the data center over another 1Gbps circuit. All the routers are participating in OSPF.

[core-sw1]---[WAN1]~~~~ckt1~~~~[DC-Core-1]
[core-sw1]---[WAN2]~~~~ckt2~~~~[DC-Core-2]

The Dallas site has network 172.25.0.0/16 and currently that gets advertised such that traffic to Dallas goes equally over WAN2 and WAN1. I would like a specific subnet say 172.25.200.0/23 to prefer ckt2 unless ckt2 goes down then it would use ckt1. What would I do in OSPF to color the route for 172.25.200.0 so that the data center prefers sending via ckt2?

Thank you.
0
I am writing a netflow collector in .net, which has lots of interesting challenges including reading the RFC!

However, I need a specific piece of information  

Here is a link to a copy of the RFC:

https://www.ietf.org/rfc/rfc3954.txt


From this I read this excerpt:
The life of a template at the Collector is limited to a fixed refresh
   timeout.  Templates not refreshed from the Exporter within the
   timeout are expired at the Collector.  The Collector MUST NOT attempt
   to decode the Flow or Options Data Records with an expired Template.

I cannot find any default expiry timeframe for a netflow Flowset Template.  

It says it must be configurable at the exporter and the collector.  When I set up a PRTG to collect netflow packets, there was not an option to specify the template expiry.  I can't see any record in the RFC that the exported can use to tell the collector when to expire templates.  PRTG works though.  

Therefore there must be a reasonable default value for how long to keep an un-refreshed template before expiring it.  

My question is, what is the default timeframe to expire a template - OR - how else can the collector learn this from the exporter? (someone manually configuring it is not the answer I want)

There must be some way in which netflow collectors work out of the box without the user specifying the template expiry.  I need to do this.
0
Hi, We have following error
Port is Busy: All pipe instances are busy

Configuration server error: Communication error : Port is Busy: All pipe instances are busy
Port is Busy: All pipe instances are busy
What is the best way to handle this issue.Without restarting the Server

Server :Windows 200R2  Data center ,Service Pack 1
1

Networking Protocols

11K

Solutions

16K

Contributors

Networking software modules are interfaced with a framework implemented on the machine's operating system that implements the networking functionality of the operating system. The best known frameworks are the TCP/IP model and the OSI model. Systems typically do not use a single protocol to handle a transmission. Instead they use a set of cooperating protocols, sometimes called a protocol family or protocol suite.[9] Some of the best known protocol suites include: IPX/SPX, X.25, AX.25, AppleTalk and TCP/IP. Other protocols indirectly related to networking include the hypertext transfer protocol (HTTP) and its related technologies, Dynamic Host Configuration Protocol (DHCP), Domain Name Server (DNS) and other Internet protocols.