Storage

43K

Solutions

35K

Contributors

Computer data storage, often called storage or memory, is a technology consisting of computer components and recording media used to retain digital data. In addition to local storage devices like CD and DVD readers, hard drives and flash drives, solid state drives can hold enormous amounts of data in a very small device. Cloud services and other new forms of remote storage also add to the capacity of devices and their ability to access more data without building additional data storage into a device.

Share tech news, updates, or what's on your mind.

Sign up to Post

I have a client running a HP DL380 Gen 9 server in a single server environment.  It is running ESXi 6.7 Free edition.  I have some thin provisioned VM's that have about 1.5TB of free space now on their drive and I need to free that storage up for the datastore.  I am showing that VAAI is not supported.  

I have little experience with VAAI and not sure if this is something that only works with SAN's or if it is supposed to work with local storage as well.  Any thoughts would be great and this is also a critical production server.
0
Hi,

Our users scan to their scan folder from the copiers. And the user can access and open the files they have personally scanned to their scan folder.  
Now here's the problem.  After they have scanned that file to their scan folder they move it to another network storage location for other staff to see. However, the other staff cannot open the file but the person who created the scanned file obviously still can.

I have a windows domain environment and the Document file server is on a server 2016.

kind regards,
0
If we migrate outlook drives via recover point on SAN

Will ost files will be double downloaded of users
0
In those systems with 16GB of optane memory and a regular mechanical sata drive, would it be better to replace the optane memory  with a nvme drive?  I have a customer getting a system  to produce music. It  comes with 16 GB of optane memory and a regular hard drive. The optane only speeds up the operating system. I’m thinking it would be better to take out the optane memory and replace it with a nvme drive. They’re cheap these days.
Thanks,
Al
0
I'm stumped by an extremely slow backup process on one of 8 virtual machines that are all being backed up using the same process.  Here are the particulars:

HP ProLiant ML350 G9 server with ESXi 6.7U3 (HP custom image) standalone installation; 2 Xeon E5-2609 CPUs; 80GB memory; @7TB of provisioned internal storage (RAID5).
There are two NAS's connected to this server; one NAS has 16TB of storage that is used for backups ONLY; the other one has 6TB of storage used for virtual disks attached to several different VMs.
There are 4 VMs on this host machine, 3 of which are backed up to the backup NAS. All of the VMs are running Windows Server 2019.

The VM that is causing the problem backups is provisioned with 6TB of file storage; a 4.5TB vmdk on the internal datastore and a 2TB vmdk on the storage NAS.  All of the VMs on this server as well as 5 VMs on another standalone ESXi 6.7U3 server are backed up to the backup NAS using one of the VMs running Veritas Backup Exec 20.4.

The problem appears to be only (or at least primarily) the 4.5TB VMDK that is on the internal storage of this server.  It is so slow that it's taking upwards of 5-6 DAYS to back up the contents of this one virtual disk.  Formerly when this data was on another host machine (an older machine running ESXi 5.5 and using Backup Exec 15) the backups would run at about 1-3GB of data/sec and take about 2-3 days to back up the entire virtual machine, plus 2 other smaller VMs, and duplicate the backup to an …
0
I have over 60 stores that use cash registers for sales.  I have a method of collecting every transaction from a cash register by capturing the cash registers electronic journal through the serial port.  The data is all text based, but very unstructured.  (I am including a sample file of this data capture to this post.)

The question I have is this:  IF you were tasked with storing, then retrieving and analyzing these data; what type of database storage system would you use?  And why that one?  

I am waffling on whether to use a SQL or NoSQL solution.

Thank you,
Jeff

Here is a sample of the raw data capture.  (Note: about half of the way down there is something called a "Z report"; which is run when a cash register is closed out.  That zero's out all of the balances and totals during that period of time it was operating.)

DATE  10/09/2019 WED  TIME 02:17
                               
2X             @ 4.29          
Purses/Backpack T1         $8.58
Childrens Clothing T1      $1.99
TAX1                       $0.63
TOTAL                     $11.20
CASH                      $12.00
CHANGE                     $0.80
CLERK 1        No.000072   00000
                               
                               
                               
                               
                               
                               
                               
DATE  10/09/2019 WED  TIME 02:18
                               
5X   …
0
I currently have a site where we had originally purchased a 3-2-1 (3 servers – 2 ISCIS – 1 SAN) solution back in 2012. The SAN was upgraded about 4 years ago, but we are really at a point where we need to do a full refresh. Overall the setup has been good and haven’t had any major complaints from end users.

Due to the single point of failure and latency sometimes incurred during backups, large upgrades to our application server which uses SQL, and RDS use, I was hoping to move away from SAN and use local storage while keeping the HA / vMotion features.

Obviously, VMware’s vSAN came straight to mind even though I knew I’d basically have to purchase all new licensing (Currently Essentials Plus) and vSAN.

We will be replacing all our Windows 2008R2 VMs with Windows 2019 but here is a quick overview of performance:

RSR-Overview.png

RSR-Disk.png
After the upgrade it be similar to another site and VM count.
GPT-Overview.png
GPT-Disk.png
Overall we should not have over 12-15 VMs. There will be 1 RDS server which will probably have around 32-64GB of RAM but I usually dedicate a host for that VM.

I called my Dell rep and tell them about the refresh and budget I’m trying to stay in for hardware and any VMware licensing and of course they come back with the vxRail solution, Enterprise Plus Licensing, etc, with a price point 3x my budget. I feel like I’m talking to a car salesman looking to see how much they can get out of me and…
0
Currently in our environment we are using NetApp  for our VMware environment, but will most likely will be purchasing a new Pure Flash array shortly.  We do have FC connecting our hosts the the upstream switches, but do not use an MDS. If we want to use FC with Pure, how would we zone the storage. Would we need to do lun masking on the host side?
0
Hello,

I have a stand alone Hyper-V server, VMs are located on a storage on a iSCSI shared disk.
Now I have another server to add as an Hyper-V new node, so the idea is to configure Hyper-V fail over cluster.

It's possible to "migrate/install" the actual stand alone Hyper-V production node to the new scenario using the same iSCSI shared disk ?

Can load the VMs load over the 2 nodes ?

Thanks.
0
Hi there.

My brother got an issue with a Seagate Central network disk. The network part doesn't work anymore, and he wants to rescue the data and copy to a usb-disk/computer drive etc...
The challenge is that Seagate utilizes a file format related to Ubuntu/Linux. He tried to pull out the hard disk from the storage unit and hook up to a Windows computer via USB. That didn't work that well, because the 3TB drive apparently is formatted in like 500GB partitions with a Ubuntu/Linux format. That is not recognized by Windows.
So the task is how to move/copy data to a "normal" disk that will work with Windows.
I found a Gparted software that is supposed to do the trick, but we're a bit insecure about what to do and if this is the right procedure.
Did any of you out there try a similar task? We would prefer if it's possible to do the whole thing with a Windows based software.
Looking forward to your suggestions.  :-)

Best regards

Ulrich
0
Really I just want to check that what i am doing is a supported config.

I have 3 servers i use for HCI using S2D 2019.

I have 3 Virtual Disks all using 33% of the storage minus 1 spare HDD for failure(cache + ssd + hdd) seems to be working ok.

I want to add 8 1TB drives into each of the servers to create a new virtual disk that only uses cache + hdd.

The HDDs are a different model than the HDDs used in the other 3 virtual disks. I know that i should utilise only the one storage pool, but would i still be in a supported configuration, on top of that how would it know what disks to create the new virtual disk on? I dont want it to attempt to use the space capacity disks i currently have (they are 1.6tb disks) with the new ones i intend to use (1tb disks)

Thanks in advance for any feedback!
0
We are redesigning out current ZFS file server. It currently only has one pool of over 70TB.

I see this is a problem since, if there are enough disk failures within the pool to make it non-functional, we have to restore all 60TB of currently existing data.

A debate has risen as to how to divide up the storage into smaller pools, and how big/small each of those pools should be.

As I see it, the only drawback of using pools that are "too small" is a lot of wasted disk space. We are using `4TB 7500 spinning disks` with `4TB SSD cache disks`. So, I'm leaning towards 20TB raidz vdisks.  That means we get about 77% of the disk space usable.

Q: Are there any other advantages/disadvantages to making the pool sizes too large/too small?
0
776 (Ready for Recovery) Logical Drive 1 (1.4 TB, RAID 5) is queued for rebuilding. hp server g5 ml350 server has been in this state for 2 weeks server has been restarted still says ready to rebuild not sure where to look next thanks
0
When I go into my Photos app, I'm seeing pictures that go back to 2017. When I look at my Storage, it says that I've got over 4 GB of photos sitting on my system. Yet when I go out to my Photo library, I'm seeing this:

Photos screenshot
Everything obvious says that the only pics I should be seeing are 2019 and that's it. I've saved everything else to another drive, but the fact that I'm still seeing pics from 2017 in the app and the fact that over 4 GB of photos are still on my system tells me that there are pics on my system that I'm not seeing.

Where else can I be looking?
0
Hi We are using Visual Studio and we want to start storage PDF or some other files in DB but we would like to know which is the best DB to do it?

we have SQL, Mysql, and MongoDB    if you know other, please advice
0
I have a PERC H330 card and would like to build an 18TB raid 5 array out of four HGST 6TB SAS disks. Two disks are 512b, 6Gb/s and the other two 4KB, 12Gb/s.

For some reason though I cannot add them into the same array. They work in separate raid 1 arrays but that isn't what I want.

Is it perhaps the case of an old firmware version on the PERC card (4.290.01-8335) or I simply cannot combine the two types of disks together?
20190928_144208.jpg
20190928_144115.jpg
20190928_144055.jpg
20190928_143921.jpg
20190928_143901.jpg
0
I'm running Parallels on my Mac and I'm being told that there isn't enough room to start Windows. When I look at my Storage, I have this:

screenshot of HD
I have deleted all of the content in my "Documents" folder and yet this graphic tells me that I've still got 14 GB of content in "Documents."

Where would this content be?
0
How might I move these files into a dropbox? The computer has two drives, c and d. It has been working slowly for a year now and I'm just now trying to transfer all the files so I can wipe the drive. I did try doing that without deleting personal files and it didn't fix it. 20190927_123129.jpg There are multiple files that give me this error message, all different types so im not sure what the common factor is. I have tried using the command prompt to try to find the original source but it did not work. I tried looking it up online and tried some of those suggestions but again, the command prompt did not turn anything up. Thanks for the help.
0
Hi,

I need to know the difference between
-  HPE 128GB (1x128GB) Octal Rank x4 DDR4-2933 CAS-24-21-21 Load Reduced 3DS Smart Memory Kit
And
- HPE 128GB (1x128GB) Octal Rank x4 DDR4-2666 CAS-22-19-19 3DS Load Reduced Memory Kit

I mean which one has better performance

Thanks
0
Looking for PS Script;
Powershell Script to find Hyper-V Cluster-wide and Host level storage space available and export the Data to Excel Sheet with 2 Columns and 2 Rows:
Columns Required: 1) Total Space available in Cluster 2) Total space available in Host​
Rows Required: 1) Cluster Name 2) Host Name​
Server Edition: Microsoft Windows Server 2016 Datacenter Edition - Hyper-V
0
Dear Vmware Experts


We have VSAN Hybrid cluster 18 nodes  with around 370 VMs  

Every server has 2 ports every port 10 G

Our core switches has 40 G   speed

Right now we have some performance issues most of the performance issues related to the Storage and network performance

So we are going to buy a new 6 servers and we are going to build all Flash VSAN cluster

The new servers will have 2 ports  10 G each  and 2 ports 40 G each

Both cluster new one and the old one will be managed under the Vcenter  (( we are using VMware distributed switch ))

After we build the new cluster we will start to migrate the most critical VMs from the old cluster to the new cluster one


And here my questions


1-      Using V motion changing host and data store between two clusters it will work without issues?
2-      When I V motion a VM like file server 40 TB can our user still use this file server or this not possible due to performance issues


My main concern for such plan the effect for availability and performance for the VMs which I want to V motion between the two cluster


Do you have any recommendations to achieve such target with fewer end users interruptions


Kindly advice
0
Hi

I need your help to put together Powershell script to

Script 1 - BAK extension file Audit

1. Script needs to be able to use input server file (server bulk)
2. Scan servers drives (E:\, F:\, G:\ or I:\) or be able to select drives
3. Look for  “*.bak” extension files.
4. Generate CSV output files with
       a. server name
       b. Bak file name and path
       c. File Size
       d. Dates temp of the file.
       3. hash
5. Email report to specific email address

I have a Audit script but it doesn't work correctly. It scans all drives, doesn't provide date of BAK file creation. It doesn't sent email with report

$ExtensionList = @('.bak')
Get-PSDrive -PSProvider FileSystem |
    ForEach-Object  {
        Get-ChildItem -Path $_.Root -Recurse -ErrorAction SilentlyContinue |
            Where-Object { $ExtensionList -eq $_.Extension } |
            ## ForEach-Object { $_.Name, $_.FullName, $_.GetHashCode() }
            Select-Object @{Name="Name";Expression={$_.Name}}, @{Name="Hash";Expression={$_.GetHashCode()}}, @{Name="FullName";Expression={$_.FullName}} |
            Export-Csv -Path C:\Temp\BAKAudit\BAKAuditReport.csv -NoTypeInformation -Append

I don't have BAK deletion script, which should do as follows

Script 2 - BAK Deletion
1. Use generated output file (from script 1) and remove"Bak" file older then 3 days.
2. Once the deletion is completed another report should be created showing what bak files from which server and from …
0
Single Hyper-V 2012 host server, one Windows Server 2012 VM running SQL Server 2016.
iSCSI storage is connected to host via two 1G links (MPIO).

PerfMon traces on the host server show high latency (40ms+) on iSCSI NICs, but only 20-50% bandwidth usage.

Storage system stats show similar info to host.

We're considering upgrading the SAN to 10GbE, but not sure that would improve performance we're not maxing out the current bandwidth.  Same uncertainty for adding additional links from host to storage

What other information can we gather toward identifying bottlenecks?
How can we improve iSCSI latency?
0
Please please can I have a DEFINITIVE answer:

I(f I am running exchange 2010 and above, with the program files on c drive and database on d drive, using default exchange values, will the mail flow be disrupted when the disk (c or d) gets to 10% or below
If not, will the disruption just depend on how much physical disk space there is for log files, database data etc and not on a % cut off

Can someone please give me a precise answer on this
Thanks
0
Hello,

while I was working with my USB stick,something wierd is happened : it switched in read only mode. From a specific point an error message has been shown and I haven't been able to copy files to the usb stick anymore and also I can't delete files inside it and I can't format it. I google a little bit looking for some solution and I found two ways to fix the problem,but they didn't work. I have also plugged in the stick on another computer to check if the protection could depend on the OS,but not. It is write protected also when plugged in a different PC. So,at this point I don't know what to do.
0

Storage

43K

Solutions

35K

Contributors

Computer data storage, often called storage or memory, is a technology consisting of computer components and recording media used to retain digital data. In addition to local storage devices like CD and DVD readers, hard drives and flash drives, solid state drives can hold enormous amounts of data in a very small device. Cloud services and other new forms of remote storage also add to the capacity of devices and their ability to access more data without building additional data storage into a device.