What would be the default gateway for 10.14.84.0/24
Hi
What would be the default gateway for this subnet?
10.14.84.0/24
Thanks
![]()
TCP/IP
Transmission Control Protocol/Internet Protocol (TCP/IP) is the set of networking protocols that define end-to-end connectivity specifying how data...
Read more- 11K Content
- 9.3K Contributors
Leading Experts In
Troubleshooting Question
Troubleshooting Question
Database replication issues
Database replication was taking place and it stopped all of a sudden with the following error:
…
Troubleshooting Question
How to Do Port Forwarding To Multiple Devices on the Same Port
How can I forward internal and external ports with the same port numbers 34001-34009 using TCP/UDP …
Troubleshooting Question
Need help with socket listener to stay active after first good pass
I have a server used to get info from SAPGUI. Everything works fine for a first request but nothing
Advice Question
I would like to know if multicast traffic is interactive between sources and destinations? and if it is how is it configured.
Multicast traffic is considered more efficient than unicast and broadcast traffic, and the main
…
Troubleshooting Question
TCP/IP Socket Listener Server in c#, unable to connect more than 1000 clients due to ThreadPool.GetMaxThreads limit of 1000
HI
I am developing TCP/IP Socket Listener Server Program in C# for Vehicle Tracking Devices, these
…
Troubleshooting Question
Problems with HP E40040 printer on the network.
We just got some HP E40040 laserjets and when we use the shared printer setup from the print server,
…
Troubleshooting Question
unable to view spiceworks page
Hi all
Have a weird one. Spiceworks used to work on desktops via ip address but suddenly has stopped
…
Troubleshooting Question
Troubleshooting Question
A few fixing of the TCP/IP port required in Ms Access
After working so hard to have this TCP/IP port fixed I have now started receiving zero values but …
Troubleshooting Question
Establishing the connection to TCP/IP protocol in Ms Access
Hello Experts !
I'm trying to establish the connection to the serial gadget connected to the server …
I'm trying to establish the connection to the serial gadget connected to the server …
Research Question
Trying to create a sequence diagram of everything involved in sending data between two computers
I am trying to understand all that happens to send data between two computers at a high level. I …
Troubleshooting Question
Network Devices Unreachable After Subnet Change
Hi,
At a client we recently changed our subnet from /16 to /21 so 255.255.0.0 to 255.255.248. The …
At a client we recently changed our subnet from /16 to /21 so 255.255.0.0 to 255.255.248. The …
Troubleshooting Question
can tracert to local router but not ping, other devices on same subnet can do both
From a new Windows laptop, I can do all networking fine EXCEPT unable to ping the default router …
Troubleshooting Question
Detailed information from tcpdump on a Linux server
Hi there,
We're trying to troubleshoot a connection from an Oracle database server to a URL. I'm …
We're trying to troubleshoot a connection from an Oracle database server to a URL. I'm …
Troubleshooting Question
ould not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "localhost" (::1) and accepting TCP/IP connections on port 5432? could not connect to server: Connection
could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host …
Troubleshooting Question
Windows SBS2011 Hanging after IPV6 disabled
Hi All,
Windows SBS 2011 - disabled IPV6 while troubleshooting a separate problem now unable to …
Windows SBS 2011 - disabled IPV6 while troubleshooting a separate problem now unable to …
Troubleshooting Question
SSIS Job changes will not save for SysAdmin role when edited remotely
I have SysAdmin role/rights on a SQL Server 2016 server. The server is physically located several …
Troubleshooting Question
Getting the wrong subnet mask
My private IP addressing is in the 10.10.10.x network, 255.255.255.0 subnet mask, 10.10.10.1 is the …
Troubleshooting Question
How run a telnet command on AIX server via C# program
We have an AIX unix server we need to connect to and then run two commands using C# or something in …
Explore solutions and more
![]()
TCP/IPBack to the top
Transmission Control Protocol/Internet Protocol (TCP/IP) is the set of networking protocols that define end-to-end connectivity specifying how data should be packeted, addressed, transmitted, routed and received at the destination. This functionality is organized into four abstraction layers which are used to sort all related protocols according to the scope of networking involved.